Study on delamination damage evolution of composite L-shaped adhesive joint based on cohesive behavior

被引：1
|
作者：
Tuo H. [1 ]
Lu Z. [2 ]
Ma X. [3 ]
Guo H. [1 ]
机构：
[1] School of Science, Chang'an University, Xi'an
[2] School of Aeronautics, Northwestern Polytechnical University, Xi'an
[3] Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing
来源：
Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University | 2021年 / 39卷 / 02期
关键词：
Adhesive joints; Composites; Delamination damage; Fatigue; Simulation; Test;
D O I：
10.1051/jnwpu/20213920309
中图分类号：
学科分类号：
摘要：
The adhesive joint of composite materials is one of the typical structures in aircraft structures, and the delamination damage is one of the most important damage modes in composite adhesive joints. In this paper, static and fatigue tests were carried out on L-shaped adhesive joints to analyze the damage evolution and failure modes of delamination damage under static and fatigue loadings. Based on the cohesive constitutive models, the static and high-cycle fatigue delamination constitutive models were developed. The static and fatigue numerical models of composite L-shaped adhesive joints were established by using finite element software. The stress distribution, deformation modes and delamination propagation laws were systematically studied. The simulation results are in good agreement with the experimental results. The delamination damage initiation, evolution and failure mechanism of L-shaped adhesive joints under static and fatigue loads were revealed by combining the experimental and the numerical results, which will provide theoretical and engineering guidance for strength and fatigue analysis of composite adhesive structures. © 2021 Journal of Northwestern Polytechnical University.
引用
收藏
页码：309 / 316
页数：7
相关论文
共 23 条
  • [1] HE X., A review of finite element analysis of adhesively bonded joints, International Journal of Adhesion and Adhesives, 31, 4, pp. 248-264, (2011)
  • [2] WALANDER T, EKLIND A, CARLBERGER T, Et al., Prediction of mixed-mode cohesive fatigue strength of adhesively bonded structure using mode I data, International Journal of Adhesion and Adhesives, 66, pp. 15-25, (2016)
  • [3] GUO Kaite, XIE Zonghong, LI Xiang, Et al., Ananalytical model and its validation for a composite double lap joints under unidirectional tension, Acta Materiae Compositae Sinica, 34, 10, pp. 2194-2204, (2017)
  • [4] XIE Mingjiu, Joints for composites materials, (2011)
  • [5] GUAN Zhidong, LIU Debo, LI Xing, Et al., Composite interlaminar damage analysis based on cohesive element, Acta Materiae Compositae Sinica, 29, 2, pp. 130-134, (2012)
  • [6] LU Zixing, A simple review for cohesive zone models of composite interface and their applications, Chinese Journal of Solid Mechanics, 36, pp. 85-94, (2015)
  • [7] YU Jianjian, ZHOU Chuwei, Interface element model for fatigue delamination analysis of composites, Acta Materiae Compositae Sinica, 26, 6, pp. 167-172, (2009)
  • [8] ZENG Haiyan, YAN Renjun, XU Lin, Et al., Experimental study on strength and fatigue of sandwich composite L-joint under bending, Journal of Ship Mechanics, 21, 12, pp. 1540-1550, (2017)
  • [9] SHI Haonan, WANG Jihui, ZHANG Guiming, The research on damage and failure modes of composite L-joint, Fiber Reinforced Plastics/Composites, 3, pp. 16-20, (2019)
  • [10] CAMANHO P P, DAVILA C G, MOURA M D., Numerical simulation of mixed-mode progressive delamination in composite materials, Journal of Composite Materials, 37, 16, pp. 1415-1438, (2003)
123