Deep hole roundness measurement method of circular structured light system

被引：0
|
作者：
Chen Z. [1 ,2 ,3 ]
Ma Z. [1 ,3 ]
Li X. [2 ]
Shen X. [1 ,3 ]
Yang S. [1 ,3 ]
Miao H. [1 ,3 ]
Lu C. [4 ]
机构：
[1] School of Mechanical Engineering, North University of China, Taiyuan
[2] The 713 Research Institute of CSSC, Zhengzhou
[3] Shanxi Provincial Key Laboratory of Intelligent Equipment Technology in Harsh Environment, Taiyuan
[4] Shandong Pulisen Group Co., Ltd, Dezhou
来源：
Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering | 2024年 / 53卷 / 04期
基金：
中国国家自然科学基金;
关键词：
circular structured light; error compensation; rigid body transformation; roundness measurement;
D O I：
10.3788/IRLA20230660
中图分类号：
学科分类号：
摘要：
Objective The circular structured light based measurement system can generate circular structured light by reflecting a laser beam through a conical reflector, and utilizing laser triangulation and close-view photogrammetry algorithms to calculate three-dimensional coordinates. This kind of measurement system has been widely studied by researchers due to its advantages such as high flexibility, high accuracy and simple structure. The current circular structured light system has certain problems in measuring roundness. It is difficult for the laser, the camera and the deep hole to be measured to be parallel or coaxial, which leads to the inability to measure the accurate circular cross-section. A measurement system based on circular structured light is constructed, the mechanism of systematic error is analyzed and a method based on the circular structured light system to measure circularity is proposed, which provides some compensation for systematic errors. Methods The mechanism that generates systematic errors in the measurement of roundness by the circular structured light system is analyzed (Fig.3). A high-precision electric linear slide is used to move the deep hole parts to be measured to complete the full-field measurement, and a high-resolution point cloud is obtained and fit the axis. Through the Rodrigues formula, the inner surface point cloud rigid body will be transformed to the point cloud axis and z-axis parallel to the location of the point cloud axis, searching for the z coordinate near the point as a cross-section of the roundness of the assessment point (Fig.4). The roundness evaluation is completed by the grid search algorithm (Fig.5). Results and Discussions The compensation by the proposed method works well in roundness measurement experiments, in which the measurement uncertainty is 4.78 µm (Tab.3). For the circular structured light measurement system, a long rod can be assembled after the laser to increase the axial measurement range of the system. For the proposed circular structured light roundness measurement method, the resolution of the 3D point cloud can be improved by reducing the step length of the motorized linear slide to further improve the measurement accuracy. Conclusions A three-dimensional measurement system of circular structured light is built, the error generated when the circular structured light system measures roundness is analyzed, and a method based on the circular structured light system to accurately measure roundness is proposed. It is verified that the use of the method to measure roundness has a good compensating effect through the measurement experiments. © 2024 Chinese Society of Astronautics. All rights reserved.
引用
收藏
相关论文
共 15 条
  • [1] Zheng Liangkui, Zheng Jianming, Li Xubo, Et al., Radial damping characteristics of a drilling tool system in BTA deep-hole vibration drilling, Journal of Vibration and Shock, 38, 14, pp. 96-104, (2019)
  • [2] Song Ci, Jiao Li, Wang Xibin, Et al., Improved minimum zone circle method for roundness error evaluation of shaft and hole parts, China Mechanical Engineering, 33, 9, pp. 1090-1097, (2022)
  • [3] Li Chao, Shen Li, Shi Feifei, Research on the method of detecting the roundness error of cylindrical inner-hole by using coaxial hollow laser, Infrared and Laser Engineering, 47, (2018)
  • [4] Li Hongmin, Guo Liyang, Song Guanfeng, Et al., Research on the detection method of pipeline welding position based on capacitance sensor, Journal of Astronautic Metrology and Measurement, 38, 1, pp. 68-73, (2018)
  • [5] Liang Haibo, Wangyi, Research on defect detection method of natural gas steel pipeline based on deep learning, Journal of Electronic Measurement and Instrumentation, 36, 9, pp. 148-158, (2022)
  • [6] Xu Wei, Research on detection method of inner surface roughness for deep hole based on fiber optical sensor, (2019)
  • [7] Zhang Xinting, Kang Lei, An Zhiyong, Et al., Improved laser triangulation probe design, Infrared and Laser Engineering, 47, 10, (2018)
  • [8] Inari T, Takashima K, Watanabe M, Et al., Optical inspection system for the inner surface of a pipe using detection of circular images projected by a laser source, Measurement, 13, 2, pp. 99-106, (1994)
  • [9] Zhuang B H, Zhang W, Cui D Y., Noncontact laser sensor for pipe inner wall inspection, Optical Engineering, 37, 5, pp. 1643-1647, (1998)
  • [10] Zhang G, He J, Li X., 3D vision inspection for internal surface based on circle structured light, Sensors & Actuators A Physical, 122, 1, pp. 68-75, (2005)
12