user

Microstructure and properties of laser cladding CoCrFeNiSix high-entropy alloy coating

被引：0
|
作者：
Hao W.-J. [1 ]
Sun R.-L. [1 ,2 ]
Niu W. [1 ,2 ]
Tan J.-H. [1 ]
Li X.-L. [1 ]
机构：
[1] School of Mechanical Engineering, Tianjin Polytechnic University, Tianjin
[2] Tianjin Key Laboratory of Advanced Mechatronics Equipment Technology, Tianjin
来源：
Surface Technology | 2021年 / 50卷 / 05期
关键词：
CoCrFeNi; Hardness; High-entropy alloy; Laser cladding; Macro morphology; Microstructure; Si; Wear resistance and anti-friction properties;
D O I：
10.16490/j.cnki.issn.1001-3660.2021.05.008
中图分类号：
学科分类号：
摘要：
The work aims to study the effect of Si content on the microstructure and properties of CoCrFeNi high-entropy alloy coating. Preparation of CoCrFeNiSix (x=0.0, 0.5, 1.0, 1.5, 2.0) high-entropy alloy coating on 45# steel substrate by laser cladding technology. The macro morphology, microstructure, microhardness and friction and wear properties of single and multi-layer cladding layer are observed by scanning electron microscopy (SEM), X-ray diffractometer (XRD), microhardness tester and friction wear tester. The research shows that high-entropy alloy coating forms a good metallurgical bond with the substrate, adding an appropriate amount of Si can improve the surface formability of the cladding layer. With the increase of Si content, the microstructure of the coating changes from equiaxed crystals to dendrites, and then to equiaxed crystals. Coating changes from fcc structure to bcc structure.The unit cell structure size decreases and the coating density increases. When x=2.0, the hardness reaches about 600HV0.5, which is about 3 times of the substrate. When the Si content is the highest, the wear amount is the smallest and the friction coefficient is also the lowest, which is about 0.49. Overall, adding Si to CoCrFeNi-based high-entropy alloy can lower the melting point of the alloy, improve the wetting ability, and improve the oxidation behavior of the coating. Si can also increase the nucleation rate of the coating and play a role in grain refinement. Si as an added element also increases the hardness of the coating and improves the wear resistance and friction reduction of the coating. © 2021, Chongqing Wujiu Periodicals Press. All rights reserved.
引用
下载
收藏
页码：87 / 94
页数：7
相关论文
共 28 条
  • [1] Yeh J.W., Chen S.K., Lin S.J., Et al., Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes[J], Advanced Engineering Materials, 6, 5, pp. 299-303, (2004)
  • [2] Zhang Y., Zuo T.-T., Tang Z., Et al., Microstructures and properties of high-entropy alloys[J], Progress in Materials Science, 61, pp. 1-93, (2014)
  • [3] Yeh J.W., Recent progress in high-entropy alloys[J], Annales De Chimie-Science Des Materiaux, 31, 6, pp. 633-648, (2006)
  • [4] Tsai M.H., Yeh J.W., High-entropy alloys: A critical review[J], Materials Research Letters, 2, 3, pp. 107-123, (2014)
  • [5] Qu M.-Y., Li T.-Q., Yan B.-H., Et al., Microstructural evolution and mechanical properties of AlxCo- FeNiMo high-entropy alloys[J], Foundry, 69, 1, pp. 11-15, (2020)
  • [6] Hou L.-L., Hui J.-T., Yao Y.-H., Et al., Effects of boron content on microstructure and mechanical properties of AlFeCoNiBx high entropy alloy prepared by vacuum arc melting[J], Vacuum, 164, pp. 212-218, (2019)
  • [7] Senkov O.N., Wilks G.B., Scott J.M., Et al., Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys[J], Intermetallics, 19, 5, pp. 698-706, (2011)
  • [8] Li H., Ma L.-L., Wei C.-Q., Et al., Microstructure and properties of laser cladding AlBxCoCrNiTi highentropy alloy coating on titanium alloys[J], Surface Technology, 46, 6, pp. 226-231, (2017)
  • [9] Yao C.-Z., Zhang P., Liu M., Et al., Electrochemical preparation and magnetic study of Bi-Fe-Co- Ni-Mn high entropy alloy[J], Electrochimica Acta, 53, 28, pp. 8359-8365, (2008)
  • [10] Braeckman B.R., Boydens F., Hidalgo H., Et al., High entropy alloy thin films deposited by magnetron sputtering of powder targets[J], Thin Solid Films, 580, pp. 71-76, (2015)
123