Distributed energy absorbing composite structure for sonar dome design

被引:0
|
作者
Shen, Qi [1 ,2 ]
Geng, Jia-Ao [1 ,2 ]
Shi, Shang [1 ,2 ]
机构
[1] China Ship Scientific Research Center, Wuxi,214082, China
[2] Taihu Laboratory of Deep-sea Technological Science, Wuxi,214082, China
来源
关键词
Acoustic noise - Boundary layer flow - Boundary layers - Domes - Hydrodynamics - Noise abatement - Sonar - Transfer matrix method - Underwater acoustics - Vibration analysis;
D O I
10.3969/j.issn.1007-7294.2024.07.015
中图分类号
学科分类号
摘要
In this paper, for the demand of low-frequency hydrodynamic noise control in submarine sonar dome, based on the coupled vibration equations of the plate and acoustic cavity, the hydrodynamic self-noise calculation model of the multi-layer composite plate was established by using the acoustic vibration transfer matrix, modal expansion method and wave vector-frequency spectrum of turbulence boundary layer pressure. According to the analysis of dynamic vibration absorption characteristics, the vibration and noise equations of the plate under the control of distributed energy absorption unit were formed, and the hydrodynamic self-noise of the distributed power absorption composite sonar domes was evaluated. The hydrodynamic self-noise reduction effect was verified through the large cavitation channel tests, providing technical support for the design of advanced low-noise sonar domes. © 2024 China Ship Scientific Research Center. All rights reserved.
引用
收藏
页码:1124 / 1132
相关论文
共 50 条
  • [1] Optimization design method for energy-absorbing composite structure with probabilistic uncertainty
    Feng Z.
    Su X.
    Zhao Y.
    Xie J.
    Mou H.
    Zhendong yu Chongji/Journal of Vibration and Shock, 2019, 38 (11): : 101 - 109and139
  • [2] Design and analysis of a composite energy-absorbing structure for use on railway vehicles
    Xie, Suchao
    Liang, Xifeng
    Zhou, Hui
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT, 2016, 230 (03) : 825 - 839
  • [3] Composite repair of a stainless steel GRP sonar dome
    Koko, TS
    Connor, MJ
    Corbett, GV
    JOURNAL OF COMPOSITES TECHNOLOGY & RESEARCH, 1997, 19 (04): : 228 - 234
  • [4] Crashworthy component design of an ultra-light helicopter with energy absorbing composite structure
    Yan, Tong
    Wang, Jidong
    3RD INTERNATIONAL SYMPOSIUM ON AIRCRAFT AIRWORTHINESS (ISAA 2013), 2014, 80 : 329 - 342
  • [5] Composite repair of a stainless steel-GRP sonar dome
    Martec Ltd, Halifax, Canada
    Journal of Composites Technology and Research, 1997, 19 (04): : 228 - 234
  • [6] DESIGN OF FIBER COMPOSITE CONICAL COMPONENTS FOR ENERGY ABSORBING STRUCTURES
    PAFITIS, DG
    HULL, D
    SAMPE JOURNAL, 1991, 27 (03) : 29 - 34
  • [7] Meta-Dome for Broadband Radar Absorbing Structure
    Jeong, Heijun
    Toan Trung Nguyen
    Lim, Sungjoon
    SCIENTIFIC REPORTS, 2018, 8
  • [8] Meta-Dome for Broadband Radar Absorbing Structure
    Heijun Jeong
    Toan Trung Nguyen
    Sungjoon Lim
    Scientific Reports, 8
  • [9] Impact characteristics of a composite energy absorbing bearing structure for railway vehicles
    Xie, Suchao
    Zhou, Hui
    COMPOSITES PART B-ENGINEERING, 2014, 67 : 455 - 463
  • [10] Crashworthiness optimisation of a composite energy-absorbing structure for railway vehicles
    Suchao Xie
    Haihong Li
    Weilin Yang
    Ning Wang
    Structural and Multidisciplinary Optimization, 2018, 57 : 1793 - 1807