Analysis of influence of three-dimensional continuous hill on power characteristics of NREL wind turbine

被引:0
|
作者
Zhou T. [1 ]
Tan J. [1 ]
Sun Y. [1 ]
Cai J. [1 ]
机构
[1] School of Mechanical and Power Engineering, Nanjing Tech University, Nanjing
来源
关键词
Continuous hilly terrain; NREL wind turbine; Power characteristics; Simulation; Wind shear function;
D O I
10.19912/j.0254-0096.tynxb.2018-1258
中图分类号
学科分类号
摘要
In order to grasp the influence of continuous hilly terrain on the power characteristics of wind turbines, the NREL Phase VI wind turbine aerodynamic model was built based on CATIA software and Computational Fluid Dynamics software (Fluent). Coupled with three-dimensional continuous hilly terrain model and wind shear, the model obtains the aerodynamic characteristics analysis method of the wind turbine under continuous hill conditions. The accuracy of the aerodynamic analysis method of the wind turbine is verified by comparison with the experimental data in the atmospheric boundary layer (ABL) wind tunnel of the NREL Phase VI wind turbine. Then, andyzing the wind turbine power on the flat ground and hilly terrain, and changing the wind turbine's position relative to the hills and the shape of the hills, studying the influence of the continuous hills on the torque, thrust and power of the wind turbine, finally obtain the best location of wing turbine for continuous mountain model. Research results show that the wind turbine at the top of the second mountain has the highest power. When the wind turbine is placed hilly downstream area, the stall zone should be avoided as much as possible, and the wind turbine on the side of the mountain has higher power than that in front of and behind the mountain. © 2021, Solar Energy Periodical Office Co., Ltd. All right reserved.
引用
收藏
页码:359 / 365
页数:6
相关论文
共 12 条
  • [1] TIAN W, OZBAY A, YUAN W, Et al., An experimental study on the performances of wind turbines over complex terrain, 51st AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, pp. 131-148, (2013)
  • [2] SHAMSODDIN S, PORTe-AGEL F., Large-eddy simulation of atmospheric boundary-layer flow through a wind farm sited on topography, Boundary-layer meteorology, 163, 1, pp. 1-17, (2016)
  • [3] TIAN W, OZBAY A, HU H., An experimental investigation on the aeromechanics and wake interferences of wind turbines sited over complex terrain, Journal of wind engineering & industrial aerodynamics, 172, pp. 379-394, (2018)
  • [4] YAN S, SHI S P, CHEN X M, Et al., Numerical simulations of flow interactions between steep hill terrain and large scale wind turbine, Energy, 151, pp. 740-747, (2018)
  • [5] TIAN L L, ZHAO N, WU C H, Et al., Optimization of unit layout for complex terrain wind arms, Journal of Nanjing University of Aeronautics & Astronautics, 45, 4, pp. 503-509, (2013)
  • [6] HE H C, YUAN W., Aerodynamic performance evaluation and layout exploration of mountainous terrain wind turbines, Acta energiae solaris sinica, 38, 10, pp. 2684-2692, (2017)
  • [7] TIAN L L, ZHAO N, ZHONG W., Numerical simulation of mutual interference of wind turbine wakes, Acta energiae solaris sinica, 8, 33, pp. 1315-1320, (2012)
  • [8] CHEN A, LIU H Z, YANG Y C, Et al., Microscopic site selection of wind turbines under complex terrain conditions, Acta energiae solaris sinica, 33, 5, pp. 782-788, (2012)
  • [9] HAND M M, SIMMS D A, FINGERSH L J, Et al., Unsteady aerodynamics experiment phase VI: wind tunnel test configurations and available data campaigns, NREL/TP, 562, pp. 2303-2339, (2001)
  • [10] KABIR I F S A, NG E Y K., Effect of different atmospheric boundary layers on the wake characteristics of NREL Phase VI wind turbine, Renewable energy, 130, pp. 1185-1197, (2018)