Pore-scale simulation on pool boiling heat transfer and bubble dynamics in open-cell metal foam by lattice boltzmann method

被引：0

作者：

Qin, Jie ^{[1
]}

Xu, Zhiguo ^{[1
]}

Ma, Xiaofei ^{[2
]}

机构：

[1] School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai,200240, China

[2] CAST-Xi'an Institute of Space Radio Technology, Xi'an,710100, China

来源：

Journal of Heat Transfer | 2021年 / 143卷 / 01期

基金：

中国国家自然科学基金;

关键词：

Bubble entrainment - Geometrical modeling - Lattice Boltzmann method - Lattice boltzmann methods (LBM) - Open-cell metal foams - Pool boiling heat transfer - Pore-scale simulation - Surface tension force;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Based on the newly developed geometrical model of open-cell metal foam, pool boiling heat transfer in open-cell metal foam, considering thermal responses of foam skeletons, is investigated by the phase-change lattice Boltzmann method (LBM). Pool boiling patterns are obtained at different heat fluxes. The effects of pore density and foam thickness on bubble dynamics and pool boiling heat transfer are revealed. The results show that bubble entrainmentpromotes fluid mixing and bubble sliding inside metal foam. Based on force analysis, the sliding bubble is pinned on the heating surface and cannot lift off completely at high heat flux due to the increasing surface tension force. Pool boiling heat transfer coefficient decreases with increasing pore density and foam thickness due to high bubble escaping resistance. Copyright © 2021 by ASME.

引用

共 50 条

[1] Pore-Scale Simulation on Pool Boiling Heat Transfer and Bubble Dynamics in Open-Cell Metal Foam by Lattice Boltzmann Method
Qin, Jie
Xu, Zhiguo
Ma, Xiaofei
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2021, 143 (01):
[2] Pore-scale investigation on flow boiling heat transfer mechanisms in open-cell metal foam by LBM
Qin, J.
Xu, Z. G.
Liu, Z. Y.
Lu, F.
Zhao, C. Y.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2020, 110 (110)
[3] Pore-scale simulation of forced convection heat transfer under turbulent conditions in open-cell metal foam
Sun, Mingrui
Hu, Chengzhi
Zha, Ligui
Xie, Zhiyong
Yang, Lei
Tang, Dawei
Song, Yongchen
Zhao, Jiafei
CHEMICAL ENGINEERING JOURNAL, 2020, 389
[4] Pore-scale numerical simulation of convection heat transfer in high porosity open-cell metal foam under rotating conditions
Yang, Kun
Liu, Kangyuan
Wang, Jiabing
APPLIED THERMAL ENGINEERING, 2021, 195 (195)
[5] Pore-scale investigation on flow boiling heat transfer mechanisms in gradient open-cell metal foams by LBM
Qin, J.
Xu, Z. Y.
Xu, Z. G.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2020, 119 (119)
[6] Experimental investigation of pool boiling heat transfer enhancement using electrodeposited open-cell metal foam
Sharifzadeh, Amir Mohammad
Moghadasi, Hesam
Saffari, Hamid
Delpisheh, Mostafa
INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2022, 176
[7] Pore-scale simulation of melting process of paraffin with volume change in high porosity open-cell metal foam
Yao, Yuanpeng
Wu, Huiying
INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2019, 138 : 322 - 340
[8] Pore-scale direct numerical simulation of fluid dynamics, conduction and convection heat transfer in open-cell Voronoi porous foams
Sepehri, Emad
Siavashi, Majid
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2022, 137
[9] Effect of supergravity on heat transfer characteristics of PCM with the pore-scale lattice Boltzmann method
Li, Xinyi
Zhu, Ziliang
Xu, Zirui
Ma, Ting
Zhang, Hao
Li, Jun
Wang, Qiuwang
INNOVATIVE SOLUTIONS FOR ENERGY TRANSITIONS, 2019, 158 : 4641 - 4647
[10] Direct Numerical Simulation of an Open-Cell Metallic Foam through Lattice Boltzmann Method
Chiappini, Daniele
Bella, Gino
Festuccia, Alessi
Simoncini, Alessandro
COMMUNICATIONS IN COMPUTATIONAL PHYSICS, 2015, 18 (03) : 707 - 722

← 1 2 3 4 5 →