Effect of joint property differences on residual stresses in electron beam welded joints of Zr-Sn-Nb alloys

被引：0
|
作者：
Zhao Y. [1 ]
Zhang A. [1 ]
Xin Y. [1 ]
Yuan P. [1 ]
Zhou Y. [1 ]
Wang H. [2 ]
Li H. [2 ]
机构：
[1] Science and Technology on Reactor System Design Technology Laboratory, Nuclear Power Institute of China, Chengdu
[2] National Key Laboratory of Precision Welding, Joining of Materials and Structures, Harbin Institute of Technology, Harbin
来源：
Hanjie Xuebao/Transactions of the China Welding Institution | 2024年 / 45卷 / 05期
关键词：
difference in joint properties; electron beam welding; residual stresses; Zr-Sn-Nb alloy;
D O I：
10.12073/j.hjxb.20231014001
中图分类号：
学科分类号：
摘要：
In order to improve residual stress numerical simulation accuracy of Zr-Sn-Nb alloy electron beam, thermophysical parameters and mechanical properties of Zr-Sn-Nb alloys and welded joints were measured. and the influence of the difference in joint properties on the residual stress of electron beam welded joints was investigated. The hybrid heat source model of electron beam welding is established, and the thermoelastic-plastic finite element method is used to numerically simulate the stress of electron beam welded 4.45 mm thick Zr-Sn-Nb alloy. The simulation model was verify by weld morphology. The results show that the peak transverse residual stresses in the weld and heat-affected zone region on the upper surface of the test plate are higher than those simulated when the properties of the two are the same, with peaks of 319 MPa and 296 MPa, respectively. The peak longitudinal stress was 318 MPa when the differences in the properties of heat-affected zone and the base material and weld are considered, which has little effect on the residual stresses in the joint. © 2024 Harbin Research Institute of Welding. All rights reserved.
引用
收藏
页码：105 / 112
页数：7
相关论文
共 15 条
  • [1] Jia Yujie, Lin Xiheng, Zou Xiaowei, Et al., Research & development history, status and prospect of zirconium alloys, Materials China, 41, 5, pp. 354-370, (2022)
  • [2] Wang Xufeng, Li Zhongkui, Zhou Jun, Et al., Application and research progress of zirconium alloy in nuclear industry, Hot Working Technology, 41, 2, pp. 71-74, (2012)
  • [3] Zhao Wanqian, Song Pengcheng, Peng Xiaoming, Et al., Fracture mode analysis of Zr-Sn-Nb alloy under simulated LOCA condition in advanced nuclear reactors, Engineering Failure Analysis, 137, (2022)
  • [4] Xing Shuo, Pu Zengping, Zhang Kun, Et al., Study on evaluation method for creep performance of new zirconium alloy cladding, Nuclear Power Engineering, 44, 4, pp. 234-239, (2023)
  • [5] Zhong Jianwei, An Junjing, Ding Huaibo, Et al., Welding processes and microstructures of weld bead of Zr-Sn-Nb-Fe-Cr and Zr-Nb-Fe zirconium alloy, Transactions of the China Welding Institution, 42, 8, (2021)
  • [6] Slobodyan M S., Arc welding of zirconium and its alloys: a review, Progress in Nuclear Energy, 133, (2021)
  • [7] Slobodyan M S., Resistance, electron and laser-beam welding of zirconium alloys for nuclear applications: A review, Nuclear Engineering and Technology, 53, 4, pp. 1049-1078, (2021)
  • [8] Wang Bo, Bao Chen, Wei Lianfeng, Et al., Effect of hydride on fracture behavior of zirconium alloy platy welds, Journal of Mechanical Engineering, 57, 20, pp. 133-140, (2021)
  • [9] Yang Jianguo, Xie Hao, Yan Dejun, Et al., FEM analysis about effect of cooling source size during welding with dry ice on welding residual stress, Transactions of the China Welding Institution, 38, 2, pp. 14-18, (2017)
  • [10] Yang Fan, Chen Furong, Numerical simulation of effect of A-UIT treatment on welding stress of 7075 aluminum alloy, Transactions of the China Welding Institution, 42, 12, pp. 91-96, (2021)
12