Preparation of multifunctional core-shell structure thermoelectric fabrics by low-temperature interfacial polymerization

被引：0
|
作者：
Zhang X. [1 ]
Li T. [1 ,2 ]
Shiu B. [3 ]
Lin J. [1 ,2 ,4 ,5 ]
Lou C. [1 ,3 ,6 ]
机构：
[1] School of Textile Science and Engineering, Tiangong University, Tianjin
[2] Key Laboratory of Advanced Textile Composite, Ministry of Education, Tiangong University, Tianjin
[3] Ocean College, Minjiang University, Fuzhou
[4] Department of Chemistry and Materials, Feng Chia University
[5] School of Chinese Medicine, China Medical University
[6] Department of Bioinformatics and Medical Engineering, Asia University
来源：
Fangzhi Xuebao/Journal of Textile Research | 2021年 / 42卷 / 02期
关键词：
Low-temperature interfacial polymerization; P-toluenesulfonic acid ion; Poly(3; 4-ethylenedioxythiophene); Polypropylene nonwoven fabric; Thermoelectric conversion device; Thermoelectric fabric;
D O I：
10.13475/j.fzxb.20200801206
中图分类号：
学科分类号：
摘要：
In order to prepare high-conductivity, flexible, and multifunctional thermoelectric fabrics, a low-temperature in-situ interfacial polymerization method was proposed to fabricate core-shell thermoelectric textile with p-toluenesulfonic acid ion-doped poly(3, 4-ethylenedioxythiophene) (PEDOT: Tos) coated with polypropylene(PP) fibers. The structure and performance of thermoelectric fabrics were characterized and analyzed by scanning electron microscope, Fourier transform infrared spectrometer, and infrared thermal imager. The results show that the prepared thermoelectric fabrics have excellent flexibility as a textile materials, and good conductivity due to PEDOT: Tos with conductivity reaching 2.1 S/cm. When a voltage of 10V is applied to both ends of a thermoelectric fabric, the surface temperature increases by about 20℃, indicating good electric heating performance and effective conversion of electric energy into heat energy. When the thermoelectric conversion device constructed using the thermoelectric fabric is placed in a temperature gradient field with a temperature difference of 20℃, it can continuously output a voltage of 0.3 mV. © 2021, Periodical Agency of Journal of Textile Research. All right reserved.
引用
收藏
页码：174 / 179
页数：5
相关论文
共 17 条
  • [1] BHARTI M, SINGH A, SAMANTA S, Et al., Flexo-green polypyrrole-silver nanocomposite films for thermoelectric power generation, Energy Conversion & Management, 144, pp. 143-152, (2017)
  • [2] LI J, TANG X, LI H, Et al., Synthesis and thermoelectric properties of hydrochloric acid-doped polyaniline, Synthetic Metals, 160, 11, pp. 1153-1158, (2010)
  • [3] YUE R, CHEN S, LU B, Et al., Facile electrosynthesis and thermoelectric performance of electroactive free-standing polythieno[3, 2-b]thiophene films, Journal of Solid State Electrochemistry, 15, 3, pp. 539-548, (2011)
  • [4] HU X, CHEN G, WANG X, Et al., Tuning thermoelectric performance by nanostructure evolution of a conducting polymer, Journal of Materials Chemistry A, 3, 42, pp. 20896-20902, (2015)
  • [5] YAO Q, CHEN L, ZHANG W, Et al., Enhanced thermoelectric performance of single-walled carbon nanotubes/polyaniline hybrid nanocomposites, ACS Nano, 4, 4, pp. 2445-2451, (2010)
  • [6] YU C, KIM Y S, KIM D, Et al., Thermoelectric behavior of segregated-network polymer nanocomposites, Nano Letters, 8, 12, pp. 4428-4432, (2008)
  • [7] JIA Y, SHEN L, LIU J, Et al., An efficient PEDOT-coated textile for wearable thermoelectric generators and strain sensors, Journal of Materials Chemistry C, 7, 12, pp. 3496-3502, (2019)
  • [8] LIU J, JIA Y, JIANG Q, Et al., Highly conductive hydrogel polymer fibers toward promising wearable thermoelectric energy harvesting, ACS Applied Materials & Interfaces, 10, 50, pp. 44033-44040, (2018)
  • [9] BUBNOVA O, KHAN Z U, MALTI A, Et al., Optimization of the thermoelectric figure of merit in the conducting polymer poly(3, 4-ethylenedioxythio-phene), Nature Materials, 10, 6, pp. 429-433, (2011)
  • [10] WU Q, HU J., A novel design for a wearable thermoelectric generator based on 3D fabric struc-ture, Smart Materials and Structures, 26, 4, (2017)
12