Reconstructed Voltage Vector Based Improved Direct Torque Control Strategy for Open-Winding Permanent Magnet Synchronous Motor with Common DC Bus

被引:0
|
作者
Sun D. [1 ]
Zhao C. [1 ]
Ke W. [1 ]
Wang M. [1 ]
Nian H. [1 ]
机构
[1] College of Electrical Engineering, Zhejiang University, Hangzhou
关键词
Common DC bus; Direct torque control; Open winding permanent magnet synchronous motor; Zero sequence current suppression;
D O I
10.19595/j.cnki.1000-6753.tces.211481
中图分类号
学科分类号
摘要
Aiming at the characteristics of open-winding permanent magnet synchronous motor (OW-PMSM) with common DC bus, such as abundant basic voltage vectors and the existence zero sequence circuit, this paper proposed an improved direct torque control strategy based on the reconstructed voltage vector for OW-PMSM with common DC bus. In order to make full use of the voltage vectors generated by OW-PMSM, 19 reconstructed voltage vectors were defined. And based on this, the zero-sequence current suppression method was improved to expand the range of candidate voltage vectors for direct torque control (DTC). According to the characteristics of reconstructed vectors, such as abundant numbers and different amplitudes, a five-bit torque hysteresis controller was introduced into DTC to suppress the torque ripple. Aiming at the problem of limited control precision of hysteresis controller, a new region division method was defined and the corresponding reconstructed voltage vector selection table was established. By locating the reference voltage vector, the reconstructed voltage vector could be selected accurately. The experimental results verify the feasibility and superiority of the proposed control strategy. © 2022, Electrical Technology Press Co. Ltd. All right reserved.
引用
收藏
页码:1644 / 1653
页数:9
相关论文
共 24 条
  • [1] Li Yu, Guo Hong, Ping Zhaochun, Et al., A full-state variable predictive torque control of current source converter fed permanent magnet synchronous motor drives, Transactions of China Electrotechnical Society, 36, 1, pp. 15-26, (2021)
  • [2] He Mingjie, Li Weiye, Peng Jun, Et al., Multi-layer quasi three-dimensional equivalent model of axial-flux permanent magnet synchronous machine, CES Transactions on Electrical Machines and Systems, 5, 1, pp. 3-12, (2021)
  • [3] Cui Fengrui, Sun Zhaolong, Xu Wei, Et al., Comparative analysis of bilateral permanent magnet linear synchronous motors with different structures, CES Transactions on Electrical Machines and Systems, 4, 2, pp. 142-150, (2020)
  • [4] Chen Wenhan, Sun Dan, Wang Mingze, Research on fault-tolerance strategy based on model predictive control for open-winding PMSM system under open-phase fault, Transactions of China Electrotechnical Society, 36, 1, pp. 77-86, (2021)
  • [5] Zhang Xiaoguang, Yan Kang, Zhang Wenhan, Hybrid double vector model predictive control for open-winding permanent magnet synchronous motor with common DC bus, Transactions of China Electrotechnical Society, 36, 1, pp. 96-106, (2021)
  • [6] Sun Dan, Lin Bin, Zhou Wenzhi, Overview of topology and control technology of open winding motor system, Transactions of China Electrotechnical Society, 32, 4, pp. 76-84, (2017)
  • [7] Lin Xiaogang, Huang Wenxin, Jiang Wen, Et al., Fault- tolerant direct torque control for open-end winding permanent magnet synchronous motor with common DC bus under open phase circuit, Transactions of China Electrotechnical Society, 35, 24, pp. 5064-5074, (2020)
  • [8] Lee Yongjae, Ha Jung-lk, Hybrid modulation of dual inverter for open-end permanent magnet synchronous motor, IEEE Transactions on Power Electronics, 30, 6, pp. 3286-3299, (2015)
  • [9] Nian Heng, Ruan Chenhui, He Yusong, Et al., Control strategy for open-winding PMSM system with common DC bus based on Z-source inverters, Proceedings of the CSEE, 39, 18, pp. 5509-5519, (2019)
  • [10] Yang Fan, Jin Xin, Shen Yu, Et al., Ground fault direction discrimination algorithm for flexible grounding system based on zero sequence admittance change, Automation of Electric Power Systems, 44, 17, pp. 88-94, (2020)