Research on Seed Feeding Device with Constant Width Polygon Groove-tooth Wheel of Air-assisted Centralized Metering Device for Wheat

被引：0
|
作者：
Wang L. [1 ,2 ]
Shu C. [1 ,2 ]
Xi R. [1 ]
Liao Q. [1 ,2 ]
Liu J. [1 ,2 ]
Liao Y. [1 ,2 ]
机构：
[1] College of Engineering, Huazhong Agricultural University, Wuhan
[2] Key Laboratory of Agricultural Equipment in Mid-lower Yangtze River, Ministry of Agriculture and Rural Affairs, Wuhan
来源：
Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery | 2022年 / 53卷 / 08期
关键词：
air-assisted centralized metering device; constant width polygon groove-tooth wheel; seed feeding device; wheat;
D O I：
10.6041/j.issn.1000-1298.2022.08.006
中图分类号：
学科分类号：
摘要：
Considering the problem that the wheat seeds have poor fluidity in the seed filling link of the seed feeding device of air-assisted centralized metering device for wheat, which leads to unstable seed filling and feeding, a seed feeding device with constant width polygon groove-tooth wheel for wheat was developed. The working principle of the seed feeding device was described. The main structural parameters of the constant width polygon groove-tooth wheel were determined. The effects of different structure types of groove-tooth wheel on seed population disturbance ability, seed filling and seed feeding performance were compared and analyzed by EDEM. The simulation results showed that when the rotating speed of the seed feeding shaft was 20 r/min, with the increase of side quantity of the constant width polygon groove-tooth wheel, the average kinetic energy of the seed population was gradually decreased, and the average disturbance ability to the seed population was decreased in turn. Nevertheless, the interval between the adjacent average kinetic energy peaks was decreased and the frequency of disturbing the seed population was increased. The average kinetic energy of the seed population under the disturbance of the constant width triangular, the constant width pentagonal, the constant width heptagonal, and the constant width nonagon groove-tooth wheel was 371.32%, 209.23%, 91.02%, and 53.37% higher than that of circular groove-tooth wheel, respectively. Taking the quality rate of seed filling ((2 ± 1) grain/hole) and missing rate of seed filling (0 grain/hole) as indicators, the quality rate of seed filling and missing rate of the constant width heptagonal groove-tooth wheel were 93.98% and 2.78%, respectively. The seed feeding quantity and seed feeding time had high linearity, and the seed filling and seed feeding performance were better. The bench test verified the seed feeding performance of the seed feeding device with the constant width heptagonal groove-tooth wheel and the effect of seed feeding device on seeding performance. The results showed that when the rotating speed was 10 ~ 60 r/min, the variation coefficient of seed feeding rate stability was not higher than 2.14%, the damage rate was not higher than 0.20% during feeding process, the variation coefficient of total seeding mass stability was not higher than 2.15%, the damage rate was not higher than 0.23% during seeding process, which met the requirements of stable wheat seed feeding. © 2022 Chinese Society of Agricultural Machinery. All rights reserved.
引用
收藏
页码：53 / 63
页数：10
相关论文
共 22 条
  • [1] YATSKUL A, LEMIERE J P., Establishing the conveying parameters required for the air-seeders, Biosystems Engineering, 166, 2, pp. 1-12, (2018)
  • [2] MA Wenpeng, YOU Yong, WANG Decheng, Et al., Optimal design and experiment of pneumatic and pneumatic collecting and discharging system of alfalfa cut-root reseeding and fertilizer applicator, Transactions of the Chinese Society for Agricultural Machinery, 52, 9, pp. 70-78, (2021)
  • [3] MUDARISOV S, BADRETDINOV I, RAKHIMOV Z, Et al., Numerical simulation of two-phase “Air Seed” flow in the distribution system of the grain seeder, Computers and Electronics in Agriculture, 168, pp. 1-7, (2020)
  • [4] DAI Yizheng, LUO Xiwen, ZHANG Minghua, Et al., Design and experiments of the key components for centralized pneumatic rice dry direct seeding machine, Transactions of the CSAE, 36, 10, pp. 1-8, (2020)
  • [5] WANG Lei, XI Rijing, LIAO Yitao, Et al., Design and test on even seeding turbine of air-assisted centralized metering device for rapeseed and wheat, Transactions of the Chinese Society for Agricultural Machinery, 52, 8, pp. 62-72, (2021)
  • [6] YUAN Hao, LIU Cailing, SONG Jiannong, Et al., Piezoelectric vibration seed supply device of precision metering device for plug seedling of super hybrid rice, Transactions of the Chinese Society for Agricultural Machinery, 51, 2, pp. 31-40, (2020)
  • [7] WANG Lei, LIAO Yitao, LIAO Qingxi, Et al., Design and test on centralized metering seed feeding device of air-assisted planter for rapeseed, Transactions of the Chinese Society for Agricultural Machinery, 52, 2, pp. 75-85, (2021)
  • [8] LEI Xiaolong, LIAO Yitao, LI Zhaodong, Et al., Design of seed churning device in air-assisted centralized metering device for rapeseed and wheat and experiment on seed filling performance, Transactions of the CSAE, 32, 18, pp. 26-34, (2016)
  • [9] XING He, ZANG Ying, WANG Zaiman, Et al., Design and experiment of stratified seed-filling room on rice pneumatic metering device, Transactions of the CSAE, 31, 4, pp. 42-48, (2015)
  • [10] CONG Jinling, LIAO Qingxi, CAO Xiuying, Et al., Seed filling performance of dual-purpose seed plate in metering device for both rapeseed & wheat seed, Transactions of the CSAE, 30, 8, pp. 30-39, (2014)
123