Research Progress in MAX Phase Ti3SiC2 Highly Conductive Coating

被引：0
|
作者：
Zhu, Jie [1 ]
Zhang, Fangzhou [1 ]
Xie, Youju [1 ]
Jia, Lintao [1 ]
Wang, Mengqian [1 ]
Li, Aijun [1 ]
机构：
[1] Institute of Materials, School of Materials Science and Engineering, Shanghai University, Shanghai,200444, China
来源：
Cailiao Daobao/Materials Reports | 2021年 / 35卷 / 23期
基金：
中国国家自然科学基金;
关键词：
Crystal impurities - Crystal structure - Silicon carbide - Solid state reactions - Chemical vapor deposition - Composite coatings - Physical vapor deposition;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Ti3SiC2(TSC) is a new type of ternary compound MAX phase with excellent properties of both metallic and ceramic materials. Ti3SiC2 as a high conductive coating with great application potential has attracted more and more attention in recent years. The preparation technologies of Ti3SiC2 coating are constantly being reformed and optimized. There're mainly five common processes to prepare Ti3SiC2 coating, including chemical vapor deposition (CVD), physical vapor deposition (PVD), solid-state reaction, aerosol deposition method (ADM) and thermal sp-raying, respectively. The properties of Ti3SiC2 coatings are closely related to their purity to a large extent. Usually, a certain degree of impurities are contained in Ti3SiC2 coating, which has become an important factor restricting its wide application. It is found that the impurities in Ti3SiC2 coating are mainly TiC, Ti5Si3, SiC, TiSi2, etc. More over, the kinds of impurities produced by different methods are different. In order to improve the purity of Ti3SiC2 coating, it is necessary to explore and optimize the preparation process. At present, reactive chemical vapor deposition (RCVD) has realized the growth of pure Ti3SiC2 coating on graphite substrate by consuming silicon carbide (SiC) sublayer. Besides, ADM has also produced pure Ti3SiC2 coatings at room temperature, which reduces the synthesis temperature of conventional Ti3SiC2 coating. In addition, PVD technology not only provides the possibility of synthesizing Ti3SiC2 coating at low temperature, but also realizes the industrial production of Ti-Si-C composite coating. This paper comprehensively reviews the recent research on Ti3SiC2. The unique crystal structure and excellent properties of Ti3SiC2 coating are discussed. The different ways to prepare Ti3SiC2 coating were analyzed and current challenges in the synthesis of pure Ti3SiC2 coating were also introduced. Furthermore, the current and potential applications of Ti3SiC2 coating has been summarized. Overall, the analyses and discussions of various Ti3SiC2 coating synthesis technologies in this review will be contributed to synthesis of high purity Ti3SiC2 coating in the future. © 2021, Materials Review Magazine. All right reserved.
引用
收藏
页码：23025 / 23032
相关论文
共 50 条
  • [1] Optimization of the Ti3SiC2 MAX phase synthesis
    El Saeed, M. A.
    Deorsola, F. A.
    Rashad, R. M.
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2012, 35 : 127 - 131
  • [2] Preparation of Ti3SiC2 MAX phase from Ti, TiC, and SiC by SPS
    Csaki, Stefan
    Lukac, Frantisek
    Veverka, Jakub
    Chraska, Tomas
    CERAMICS INTERNATIONAL, 2022, 48 (19) : 28391 - 28395
  • [3] HiPIMS induced a facile synthesis of Ti3SiC2 MAX phase coating at 850 °C
    Xu, Yuxi
    Zhang, Yan
    Zhang, Anfeng
    Ma, Guanshui
    Wang, Zhenyu
    Wang, Aiying
    SURFACE & COATINGS TECHNOLOGY, 2025, 501
  • [4] Dynamic fracture behavior of a MAX phase Ti3SiC2
    Shannahan, L.
    Barsoum, M. W.
    Lamberson, L.
    ENGINEERING FRACTURE MECHANICS, 2017, 169 : 54 - 66
  • [5] Thermophysical Properties of Ti3SiC2 MAX Phase Composites with SiC Reinforcement
    Bajpai, Shipra
    Ma, Beihai
    Singh, Dileep
    TRANSACTIONS OF THE INDIAN CERAMIC SOCIETY, 2025,
  • [6] Effect of grain orientation on the compressive response of highly oriented MAX phase Ti3SiC2
    Zhao, Xingyuan
    Sokol, Maxim
    Barsoum, Michel W.
    Lamberson, Leslie
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 809
  • [7] Desilicidation of the Ti3SiC2 MAX Phase in a CO and SiO Atmosphere
    E. I. Istomina
    P. V. Istomin
    A. V. Nadutkin
    V. E. Grass
    Inorganic Materials, 2020, 56 : 1217 - 1224
  • [8] Desilicidation of the Ti3SiC2 MAX Phase in a CO and SiO Atmosphere
    Istomina, E. I.
    Istomin, P. V.
    Nadutkin, A. V.
    Grass, V. E.
    INORGANIC MATERIALS, 2020, 56 (12) : 1217 - 1224
  • [9] Fabrication of SiCf/Ti3SiC2 by the electrophoresis of highly dispersed Ti3SiC2 powder
    Kwon, Heejin
    Zhou, Xiaobing
    Yoon, Dang-Hyok
    CERAMICS INTERNATIONAL, 2020, 46 (11) : 18168 - 18174
  • [10] Reaction synthesis of Ti3SiC2 phase in plasma sprayed coating
    Pasumarthi, Venkata
    Chen, Yao
    Bakshi, Srinivasa R.
    Agarwal, Arvind
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 484 (1-2) : 113 - 117
12345