Ferrite Phase Transformation Model of DP600 Hot Rolled Dual-Phase Steel Under ESP Process

被引：0
|
作者：
Zhou X.-G. [1 ]
Ma X. [1 ]
Jiang S. [1 ]
Liu Z.-Y. [1 ]
机构：
[1] State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang
来源：
Dongbei Daxue Xuebao/Journal of Northeastern University | 2024年 / 45卷 / 04期
关键词：
ferrite phase transformation; incubation time; mathematical model; phase transformation kinetics; prediction;
D O I：
10.12068/j.issn.1005-3026.2024.04.004
中图分类号：
学科分类号：
摘要：
In order to establish ferrite phase transformation kinetics mathematical model of DP600 hot rolled dual-phase steel under the ESP process condition, the isothermal phase transformation and continuous cooling phase transformation experiments were conducted on the experimental steel by using the dynamic phase transformation dilatometer. Based on the measured ferrite phase transformation incubation time and ferrite volume fraction, the incubation time of ferrite phase transformation was calculated by combining classical nucleation theory above the deformation temperature, and the incubation time of ferrite phase transformation below the deformation temperature was calculated by fitting ∆GV according to the experimental data. Considering the influence of cooling rate, the additivity rule was modified and based on this, the starting temperature and volume fraction of ferrite phase transformation under continuous cooling conditions were calculated. The results showed that the calculated starting temperature and volume fraction of ferrite phase transformation using the modified phase transformation model are in good agreement with the measured values, which can be used to predict the ferrite phase transformation behavior of DP600 dual-phase steel under the ESP process. © 2024 Northeast University. All rights reserved.
引用
收藏
页码：483 / 489
页数：6
相关论文
共 14 条
  • [1] Degner M, Garbracht K, Lindenberg H U, Et al., History of hot strip rolling since 1926[J], Stahl Undsen, 122, 11, pp. 73-84, (2002)
  • [2] Lei Guang - zhou, Zhao Hua - guo, Sun Shao - hui, ESP super - thin strip endless rolling equipment & process flow [J], CFHI Technology, 4, pp. 27-29, (2016)
  • [3] Saito Y, Shiga C., Computer simulation of microstructural evolution in thermomechanical processing of steel plates[J], ISIJ International, 32, 3, pp. 414-422, (1992)
  • [4] Militzer M, Hawbolt E B, Meadowcroft T R., Microstructural model for hot strip rolling of high-strength low-alloy steels [J], Metallurgical and Materials Transactions A, 31, 4, pp. 1247-1259, (2000)
  • [5] Liu Xue-feng, Jia Tao, Zhu Ben-qiang, Modeling the effect of Nb on austenite→ferrite phase transformation kinetics, Journal of Northeastern University(Natural Science), 37, 5, pp. 642-646, (2016)
  • [6] Capdevila C, Garcia de Andres C, Caballero F G., Incubation time of isothermally transformed allotriomorphic ferrite in medium carbon steels, Scripta Materialia, 44, 1, pp. 129-134, (2001)
  • [7] Xu Yun-bo, Wang Guo-dong, Liu Xiang-hua, Mathematical modelling of ferrite transformation of low carbon steel through low temperature heavy deformation [J], Acta Metallurgica Sinica, 38, 10, pp. 1021-1026, (2002)
  • [8] Xu Zu-yao, Mou Yi-wen, Thermodynamic(KRC model)of the bainitic transformation in Fe - C alloys [J], Acta Metallurgica Sinica, 21, 2, pp. 13-24, (1985)
  • [9] Lange W F, Enomoto M, Aaronson H I., The kinetics of ferrite nucleation at austenite grain boundaries in Fe-C alloys [J], Metallurgical Transactions A, 19, 3, pp. 427-440, (1988)
  • [10] Gomez M, Medina S F, Caruana G., Modelling of phase transformation kinetics by correction of dilatometry results for a ferritic Nb-microalloyed steel[J], ISIJ International, 43, 8, pp. 1228-1237, (2003)
12