Design of Experimental Device for Sealing Performance of Hydraulic Pump Plungers

被引：0
|
作者：
Luo L. [1 ]
He X. [2 ]
Liu X. [2 ]
Zhang Q. [2 ]
Huang H. [2 ]
机构：
[1] Engineering Practice Innovation Center, Huazhong University of Science and Technology, Wuhan
[2] School of Mechancal Science and Engineering, Huazhong University of Science and Technology, Wuhan
来源：
Zhongguo Jixie Gongcheng/China Mechanical Engineering | 2024年 / 35卷 / 02期
关键词：
experimental device; hydraulic plunger pump; loading system; plunger seal;
D O I：
10.3969/j.issn.1004-132X.2024.02.006
中图分类号：
TH3 [泵];
学科分类号：
080704 ;
摘要：
In order to solve the sealing reliability and selective design problems of the plungers and cylinder liners of oil-water separated plunger pump, a plunger sealing performance experimental device and the loading system were developed to simulate the actual operating conditions of the hydraulic plunger pump, and the dynamic balance design of the experimental device was carried out. The simulation model of the loading system for the experimental device was established, and then a reasonable loading method was determined through simulation and comparison. The loading test and stability test of the experimental device show that the operation of the experimental device is stable and reliable, and the volumetric efficiency is within a reasonable range. © 2024 Chinese Mechanical Engineering Society. All rights reserved.
引用
收藏
页码：229 / 235
页数：6
相关论文
共 15 条
  • [1] NIE Songlin, YIN Fanglong, Progress and Prospect of Water Hydraulic Piston Pump [J], Chinese Hydraulics & Pneumatics, 1, pp. 1-7, (2015)
  • [2] YANG Huayong, ZHOU Hua, New Achievements in Water Hydraulics [J], Chinese Hydraulics & Pneumatics, 2, pp. 1-6, (2013)
  • [3] GUO Ming, NIE Songlin, JI Hui, Et al., Design and Lubrication Characteristics of a New Integrated Slipper Swashpalte Interface in Seawater Hydraulics Piston Pumps, China Mechanical Engineering, 33, 24, pp. 2942-2952, (2022)
  • [4] WANG Xiaolan, Design and Property Study of New Water Hydraulics Variable Pump [D], (2017)
  • [5] TANG Zhenyu, Thermodynamic Research on the Oil-water Separation Axial Piston Pump with Port Valves [D], (2017)
  • [6] NIKAS G K, ALMOND R V, BURRIDGE G., Experimental Study of Leakage and Friction of Rectangular, Elastomeric Hydraulic Seals for Reciprocating Motion from -54 to +135 °C and Pressures from 3.4 to 34.5 MPa, Tribology Transactions, 57, 5, pp. 846-865, (2014)
  • [7] WANG Shiqiang, The Reciprocating Hydraulic Seal Technology Research Based on Hydraulic Test Bench [D], (2016)
  • [8] WANG Jun, Research on the Lubrication and Sealing Performance of Reciprocating seals on Radial Hydraulic Piston Pump with High Water-based Liquid, (2021)
  • [9] WANG Bingqing, Theoretical and Experimental Study on Soft Elastohydrodynamic Lubrication of Hydraulic Linear Reciprocating Seals [D], (2019)
  • [10] NIE Songlin, LI Shuo, YIN Fanglong, Study on Fluid-solid Coupling of Deformation Characteristics of Piston Bush in Water Hydraulic Pumps [J], China Mechanical Engineering, 31, 10, pp. 1135-1141, (2020)
12