Preparation of Porous Brazed Grinding Wheels and Experimental Research of SiC Ceramic Grinding

被引：0
|
作者：
Liu W. [1 ,2 ]
Mao G. [1 ,2 ]
Yan C. [1 ,2 ]
Li B. [1 ,2 ]
机构：
[1] School of Mechanical Engineering, Hunan University of Science and Technology, Hunan, Xiangtan
[2] Hunan Prov. Key Laboratory of High Efficiency and Precision Machining of Difficult-to-cut Material, Hunan University of Science and Technology, Hunan, Xiangtan
来源：
Zhongguo Jixie Gongcheng/China Mechanical Engineering | 2022年 / 33卷 / 15期
关键词：
brazed grinding wheel; grinding performance; porous; SiC ceramics; TiH[!sub]2[!/sub;
D O I：
10.3969/j.issn.1004-132X.2022.15.004
中图分类号：
学科分类号：
摘要：
Based on the molding and vacuum solid-phase sintering processes，a porous brazed diamond grinding wheel（PBDGW）with high bonding strength and uniform pore distribution was prepared by using Cu-10Sn binder，oxidation pretreated TiH2 brazed pore-forming agent and MBD8 diamond abrasive particles. The SiC ceramic grinding experiments of PBDGW and multilayer brazed diamond grinding wheel（MBDGW） were carried out for comparison，then the grinding performances of grinding wheel were analyzed from grinding force，workpiece surface roughness and surface/sub-surface morphology. The experimental results show that the tangential force in SiC ceramics grinding with PBDGW decreases by 8.4%～23.6%，the normal force decreases by 10.2%～38.6%，and the average reduction of surface roughness is as 10.4%. The workpiece surface has better integrity，and the surface/sub-surface brittle fracture，microscopic crack and other defects are less. © 2022 China Mechanical Engineering Magazine Office. All rights reserved.
引用
收藏
页码：1787 / 1793
页数：6
相关论文
共 25 条
  • [1] ISHIHARA M, BABA S, TAKAHASHI T, Et al., Fundamental Thermomechanical Properties of SiC-based Structural Ceramics Subjected to High Energy Particle Irradiations[J], Fusion Engineering and Design, 51, pp. 117-121, (2000)
  • [2] JI R J, LIU Y H, ZHANG Y Z, Et al., Optimizing Machining Parameters of Silicon Carbide Ceramics with ED Milling and Mechanical Grinding Combined Process[J], The International Journal of Advanced Manufacturing Technology, 51, 1, pp. 195-204, (2010)
  • [3] CAO J G, WU Y B, LU D, Et al., Material Removal Behavior in Ultrasonic-assisted Scratching of SiC Ceramics with a Single Diamond Tool[J], International Journal of Machine Tools and Manufacture, 79, pp. 49-61, (2014)
  • [4] KHALID F, KLOTZ U, ELSENER H R, Et al., On the Interfacial Nanostructure of Brazed Diamond Grits[J], Scripta Materialia, 50, 8, pp. 1139-1143, (2004)
  • [5] YAO Zhengjun, XU Hongjun, XIAO Bing, Et al., Research on Furnace Brazing of Diamond Grinding Wheel with Ni-Cr Alloy under Argon Atmosphere[J], China Mechanical Engineering, 12, 8, pp. 956-958, (2001)
  • [6] MUKHOPADHYAY P, GHOSH A., High Vacuum Brazing of Synthetic Diamond Grits with Steel Using Micro/Nano Al2O3 Reinforced Ag-Cu-Ti Alloy[J], Journal of Materials Processing Technology, 266, pp. 198-207, (2019)
  • [7] DUAN D Z, HAN F, DING J J, Et al., Microstructure and Performance of Brazed Diamonds with Multilayer Graphene-modified Cu-Sn-Ti Solder Alloys[J], Ceramics International, 47, 16, pp. 22854-22863, (2021)
  • [8] LOGINOV P, SIDORENKO D, SHVYNDINA N, Et al., Effect of Ti and TiH2 Doping on Mechanical and Adhesive Properties of Fe-Co-Ni Binder to Diamond in Cutting Tools[J], International Journal of Refractory Metals and Hard Materials, 79, pp. 69-78, (2019)
  • [9] WANG C Y, ZHOU Y M, ZHANG F L, Et al., Interfacial Microstructure and Performance of Brazed Diamond Grits with Ni-Cr-P Alloy[J], Journal of Alloys and Compounds, 476, 1, pp. 884-888, (2008)
  • [10] AGARWAL S, RAO P V., Experimental Investigation of Surface/Subsurface Damage Formation and Material Removal Mechanisms in SiC Grinding[J], International Journal of Machine Tools and Manufacture, 48, 6, pp. 698-710, (2007)
123