Rheological Properties of PP/PP-g-MAMg Ionomer

被引:0
|
作者
Sun X. [1 ]
Yu H. [1 ]
Zhang W. [1 ,2 ]
机构
[1] School of Materials Science and Chemical Engineering, Harbin University of Science and Technology, Harbin
[2] Yangzhou Longda Eletrical Materials Co, Ltd, Yangzhou
来源
Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering | 2022年 / 38卷 / 11期
关键词
Ionomer; Polypropylene; Rheological properties;
D O I
10.16865/j.cnki.1000-7555.2022.0241
中图分类号
学科分类号
摘要
PP- g- MAMg was prepared by blending polypropylene grafted maleic anhydride (PP- g- MAH) with magnesium stearate. The dielectric properties, volume resistivity and breakdown field strength of PP- g- MAMg ionomers were characterized by IR and XPS. The results show that with the increase of Mg2+ content, the dielectric constant and dielectric loss of PP-g-MAMg ionomers first increase and then decrease, and the volume resistivity of PP-g-MAMg ionomers first increases and then decreases, the breakdown field strength first decreases, then increases, and then decreases; the rheological properties of PP/PP- g- MAMg ionomer composites were studied by rotating rheometer. The results show that after adding PP- g- MAMg, the storage modulus(G')and loss modulus(G'')of the system are improved compared with those of pure PP, and the high frequency region is more obvious than the low frequency region; the addition of PP-g-MAMg has a great influence on the composite viscosity of PP. Compared with pure PP, the composite viscosity of the PP/PP-g-MAMg system is higher(g*), showing an obvious upward trend. © 2022, Editorial Board of Polymer Materials Science & Engineering. All right reserved.
引用
收藏
页码:126 / 131
页数:5
相关论文
共 15 条
  • [1] Zhou Y X, Zhao J K, Liu R, Et al., Analysis and prospect of key technologies of high voltage/ultra-high voltage power cable, High Voltage Technology, 40, 9, pp. 2593-2612, (2014)
  • [2] Wu M, Wang C, Chen C., Chemical modification of atactic polypropylene and its applications as a crystallinity additive and compatibility agent, Polymer, 194, (2020)
  • [3] Luo B, Meng F B, Wang T T, Et al., Effect of degassing treatment on insulation characteristics of HVDC cable, Journal of Electrotechnics, 36, pp. 730-735, (2021)
  • [4] Liang Y, Liu L Z, Zhang W L, Et al., Preparation and electrical properties of 4-acetoxystyrene grafted polypropylene for HVDC cable insulation, Journal of Materials Science: Materials in Electronics, 31, pp. 3890-3898, (2020)
  • [5] Liang Y, Weng L, Zhang W L, Et al., Block polypropylene/styreneethylene-butylene-styrene tri-block copolymer blends for recyclable HVDC cable insulation, Materials Research Express, 7, (2020)
  • [6] Liang Y, Weng L, Zhang W L., Preparation and electrical properties of 4-allyloxy-2-hydroxybenzophenone grafted polypropylene for HVDC cables, Journal of Electronic Materials, 20, pp. 1-9, (2021)
  • [7] Zhang W L, Hu D S, Li C Y, Et al., Preparation and electrical properties of polypropylene grafted with 4-acetoxystyrene, Polymer Materials Science & Engineering, 36, 9, pp. 81-87, (2020)
  • [8] Zha J W, Wu Y H, Wang S J, Et al., Improvement of space charge suppression of polypropylene for potential application in HVDC cables, IEEE Transactions on Dielectrics and Electrical Insulation, 23, pp. 2337-2343, (2016)
  • [9] He Y, Wu B, Shao H, Et al., Synergistic effect of styrene and zinc dimethyldithiocarbamate on the properties of high melt strength polypropylene, Journal of Vinyl and Additive Technology, 24, pp. 13-17, (2018)
  • [10] Chen Q, Bao N Q, Wang J H, Et al., Linear viscoelasticity and dielectric spectroscopy of ionomer/plasticizer mixtures: a transition from ionomer to polyelectrolyte, Macromolecules, 48, pp. 8240-8252, (2015)