Axial compression performance test and bearing capacity calculation of L-shaped section partially encased composite steel-concrete columns

被引：0
|
作者：
Mao, Jiayue [1 ]
Liu, Yong [1 ,2 ,3 ]
Wang, Jingfeng [1 ,4 ,5 ]
Tao, Shuqing [1 ]
机构：
[1] College of Civil Engineering, Hefei University of Technology, Hefei,230009, China
[2] Key Laboratory of Earthquake Engineering and Engineering Vibration, Institute of Engineering Mechanics, China Earthquake Administration, Harbin,150080, China
[3] Key Laboratory of Earthquake Disaster Mitigation, Ministry of Emergency Management, Harbin,150080, China
[4] Anhui Advanced Steel Structure Technology and Industrialization Collaborative Innovation Center, Hefei University of Technology, Hefei,230009, China
[5] Anhui Provincial Key Laboratory of Civil Engineering Structures and Materials, Hefei University of Technology, Hefei,230009, China
来源：
Jianzhu Jiegou Xuebao/Journal of Building Structures | 2024年 / 45卷 / 10期
关键词：
To study the axial compression performance of L-shaped partially encased composite steel-concrete (LPEC) columns; axial compression tests of six LPEC short columns were conducted. The influence of critical parameters; such as steel content; link spacing and section aspect ratio; on the load-displacement curve; bearing capacity; stiffness; ductility coefficient and bearing capacity improvement coefficient of LPEC short columns was investigated. The typical failure mode and load-bearing mechanism of LPEC short columns were revealed. Results indicate that the LPEC column has good mechanical performance; and its failure modes are mainly concrete crushing in the middle of the column and local buckling of the section steel flange. Meanwhile; concrete collapse at the end of the column and link breaking around the weld seam also occur in some specimens. Increasing the steel content and decreasing the link spacing can obviously improve the confinement effect of concrete; and then improve the bearing capacity and ductility of the specimen; whereas the influence of the section aspect ratio on the bearing capacity is not significant. In addition; for LPEC columns; the axial compression bearing capacities calculated by the steel-concrete composite column bearing capacity formulas given in the specifications ACI318-14; Eurocode 4 and T/ CECS 719—2020 ‘Technical specification for partially-encased composite structures of steel and concrete’ are conservative due to failing to consider the concrete confinement effect. Based on the superposition principle; a simplified calculation method for the axial compression bearing capacity of LPEC columns considering the confinement effect of concrete was proposed; and the calculated results are in good agreement with the experimental results. © 2024 Science Press. All rights reserved;
D O I：
10.14006/j.jzjgxb.2023.0499
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：87 / 96
相关论文
共 50 条
  • [1] Axial Compression Performance of L-Shaped Partially Encased Steel-Concrete Composite Stub Columns
    Qi, Yuansen
    Zhu, Haochuan
    Xu, Youwu
    Xiao, Zhibin
    Jin, Zhenfen
    BUILDINGS, 2024, 14 (09)
  • [2] Axial Compression Performance Test and Bearing Capacity Calculation Method of Square Steel Tube–Timber–Concrete Composite L-Shaped Columns
    Weng, Weisu
    Lv, Haonan
    Liu, Bo
    Zhang, Minli
    Jing, Ziteng
    Hu, Jianghao
    Hu, Shuqian
    Buildings, 2024, 14 (12)
  • [3] Experimental and theoretical analysis of L-shaped partially encased thin-walled steel-concrete composite columns under axial compression
    Wang, Jingfeng
    Xu, Qiuyu
    Liu, Yong
    He, Weidong
    Wang, Jingyi
    Li, Beibei
    THIN-WALLED STRUCTURES, 2025, 210
  • [4] Bearing capacity calculation of L-shaped concrete filled steel tubular columns subjected to axial compression
    Tu, Yongqing
    Wen, Qianshan
    Jianzhu Jiegou Xuebao/Journal of Building Structures, 2013, 34 (SUPPL.1): : 314 - 320
  • [5] Seismic performance and limit values of axial ratio for partially encased composite steel-concrete cross-shaped and T-shaped section columns
    Li B.
    Zhou W.
    Zhao G.
    Qi D.
    Li Y.
    Jianzhu Jiegou Xuebao/Journal of Building Structures, 2023, 44 (08): : 99 - 109
  • [6] Simulation of partially encased composite steel-concrete columns with steel columns
    Marinopoulou, A. A.
    Balopoulos, V. D.
    Kalfas, C. N.
    JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2007, 63 (08) : 1058 - 1065
  • [7] Structural behavior of steel-concrete partially encased composite columns containing demolished concrete lumps under axial compression
    Wu, Bo
    Jian, Si-Min
    Zhao, Xin-Yu
    ENGINEERING STRUCTURES, 2019, 197
  • [8] Axial compressive performance of partially encased steel-concrete composite stub columns filled with lightweight aggregate concrete
    Qian, Zhenghao
    Wang, Jingfeng
    Liu, Yong
    Xu, Qiuyu
    ENGINEERING STRUCTURES, 2023, 291
  • [9] Experimental investigation and design method of axial compression behavior of T-shaped partially encased steel-concrete composite stub columns
    Tao, Shu-qing
    Liu, Yong
    Wang, Jing-feng
    Yu, Qi-jun
    Zhao, Ji-hang
    JOURNAL OF BUILDING ENGINEERING, 2024, 85
  • [10] Global stability capacity of partially encased composite columns with cruciform-shaped section under axial compression
    Zhao, Bida
    Shen, Yulong
    Wang, Bin
    Yu, Jie
    Gong, Dacheng
    Shi, Tao
    STRUCTURES, 2024, 66
12345