The Effect of Homogenization Parameters on the Structure of EN AW-6082 Alloy

被引：0
|
作者：
Luštinec J. [1 ]
Očenášek V. [1 ]
Jelínek M., jr. [2 ]
机构：
[1] SVÚM a.s., Tovární 2053, Čelákovice
[2] Constellium Extrusions Děčín s.r.o., Ústecká 751/37, Děčín V-Rozbělesy
来源：
Manufacturing Technology | 2017年 / 17卷 / 05期
关键词：
EN AW-6082 aluminium alloy; Extrusion; Homogenization; Phases; Structure;
D O I：
10.21062/ujep/x.2017/a/1213-2489/MT/17/5/766
中图分类号：
学科分类号：
摘要：
High temperature homogenization annealing of DC cast billets from aluminium alloys used for extrusion pressing is considered as one of substantial technological operations during extrusion processing. The structure of DC cast billets consists of dendrite cell structure and contains coarse and inhomogeneously distributed intermetallic phases of β-AlFeSi and α-Al(Fe,Mn)Si type.Structure after a homogenization annealing is quite decisive for both the final properties of extrusions and the extrudability of the cast structure. The present paper deals with the medium strength heat-treatable EN AW-6082 alloy. It is investigated the effect of heating rate, time at the annealing temperature and the cooling rate of continually cast billets during the homogenization annealing on the changes of electrical conductivity, structure and intermetallic phases. Copyright © 2017. Published by Manufacturing Technology. All rights reserved.
引用
收藏
相关论文
共 50 条
  • [1] EFFECT OF SOME HEAT TREATMENTS ON CAVITATION EROSION RESISTANCE OF THE EN AW-6082 ALLOY
    Frant, Florin
    Mitelea, Ion
    Bordeasu, Ilare
    Codrean, Cosmin
    Mutascu, Daniel
    28TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2019), 2019, : 663 - 667
  • [2] The effect of precipitation of metastable phases on the thermophysical and mechanical properties of the EN AW-6082 alloy
    Stamenkovic, Uros
    Ivanov, Svetlana
    Markovic, Ivana
    Balanovic, Ljubisa
    Gorgievski, Milan
    REVISTA DE METALURGIA, 2019, 55 (04)
  • [3] Effect of Heat Treatment on Tensile Properties and Hardness of a Forging Made of EN AW-6082 Alloy
    Pezda, J.
    Karpierz, G.
    ENGINEER OF THE XXI CENTURY, 2020, 70 : 81 - 92
  • [4] Controlled grain size distribution and refinement of an EN AW-6082 aluminium alloy
    Lampke, Thomas
    Dietrich, Dagmar
    Nickel, Daniela
    Bergmann, Markus
    Zachaeus, Rene
    Neugebauer, Reimund
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2011, 102 (08) : 977 - 981
  • [5] Cavitation Erosion Characteristics of the EN AW-6082 Aluminum Alloy by TIG Surface Remelting
    Mitelea, Ion
    Bordeasu, Ilare
    Frant, Florin
    Utu, Ion-Dragos
    Craciunescu, Corneliu Marius
    Ghera, Cristian
    MATERIALS, 2023, 16 (07)
  • [6] Influence of corrosion fatigue on the stress gradient effect of the aluminium alloy EN AW-6082 T6
    Schoenowitz, Markus
    Maier, Bernd
    Gruen, Florian
    INTERNATIONAL JOURNAL OF FATIGUE, 2024, 184
  • [7] Modeling of dynamic microstructure evolution of EN AW-6082 alloy during hot forward extrusion
    Parvizian, F.
    Guezel, A.
    Jaeger, A.
    Lambers, H. -G.
    Svendsen, B.
    Tekkaya, A. E.
    Maier, H. J.
    COMPUTATIONAL MATERIALS SCIENCE, 2011, 50 (04) : 1520 - 1525
  • [8] Effect of Cr and Zr on the grain structure of extruded EN AW 6082 alloy
    Birol, Yucel
    METALS AND MATERIALS INTERNATIONAL, 2014, 20 (04) : 727 - 732
  • [9] Effect of Cr and Zr on the grain structure of extruded EN AW 6082 alloy
    Yucel Birol
    Metals and Materials International, 2014, 20 : 727 - 732
  • [10] Microstructural effect on the wear behaviour of the hard-anodised aluminium alloys EN AW-6082 and EN AW-7075
    Nickel, D.
    Lampke, Th.
    Alisch, G.
    Steinhaeuser, S.
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2009, 40 (07) : 523 - 531
12345