Numerical simulation and mechanical properties of spray-assisted friction stir welding RAFM steel

[1] Zhou Xiaosheng, Liu Chenxi, Yu Liming, Et al., Phase transformation behavior and microstructural control of high-Cr martensitic/ferritic heat-resistant steels for power and nuclear plants: A review, Journal of Materials Science & Technology, 31, 3, pp. 235-242, (2015)

[2] Zhang Qihang, Li Jialin, Shen Jiming, Et al., Hot isostatic pressing diffusion bonding of V4Cr4Ti alloy/RAFM steel and interface properties of the joints, Transactions of the China Welding Institution, 43, 7, pp. 57-62, (2022)

[3] Zhang Chao, Cui Lei, Wang Dongpo, Et al., The heterogeneous microstructure of heat affect zone and its effect on creep resistance for friction stir joints on 9Cr-1.5W heat resistant steel, Scripta Materialia, 158, pp. 6-10, (2019)

[4] Tian Chaobo, Yang Xinqi, Li Shengli, Et al., High temperature creep behavior of friction stir welding joints for CLAM steel, Transactions of the China Welding Institution, 42, 2, pp. 38-45, (2021)

[5] Gao Heng, Song Yuanyuan, Zhao Mingjiu, Et al., Effects of tempering on the microstructure and mechanical property of electron beam welding joint of 9Cr2WVTa steel, Acta Metallurgica Sinica, 50, 12, pp. 1429-1436, (2014)

[6] Rouzbehani R., Kokabi A H, Sabet H, Et al., Metallurgical and mechanical properties of underwater friction stir welds of Al7075 aluminum alloy[J], Journal of Materials Processing Technology, 262, pp. 239-256, (2018)

[7] Mofid M A, Abdollah Z A, Malek G F., The effect of water cooling during dissimilar friction stir welding of Al alloy to Mg alloy[J], Materials and Design, 36, pp. 161-167, (2011)

[8] Mofid M A, Abdollah Z A, Gur C H., Submerged friction-stir welding (SFSW) underwater and under liquid nitrogen: An improved method to join Al alloys to Mg alloys, Metallurgical and Materials Transactions, 43, 13, pp. 5106-5114, (2012)

[9] Mofid M A, Abdollah Z A, Gur C H., Investigating the formation of intermetallic compounds during friction stir welding of magnesium alloy to aluminum alloy in air and under liquid nitrogen[J], The International Journal of Advanced Manufacturing Technology, 71, 5-8, pp. 1493-1499, (2014)

[10] Mudawar I, Estes K A., Optimizing and predicting CHF in spray cooling of a square surface, Journal of Heat Transfer: Transaction of the ASME, 118, 3, pp. 672-679, (1996)

[1] Zhou Xiaosheng, Liu Chenxi, Yu Liming, Et al., Phase transformation behavior and microstructural control of high-Cr martensitic/ferritic heat-resistant steels for power and nuclear plants: A review, Journal of Materials Science & Technology, 31, 3, pp. 235-242, (2015)

[2] Zhang Qihang, Li Jialin, Shen Jiming, Et al., Hot isostatic pressing diffusion bonding of V4Cr4Ti alloy/RAFM steel and interface properties of the joints, Transactions of the China Welding Institution, 43, 7, pp. 57-62, (2022)

[3] Zhang Chao, Cui Lei, Wang Dongpo, Et al., The heterogeneous microstructure of heat affect zone and its effect on creep resistance for friction stir joints on 9Cr-1.5W heat resistant steel, Scripta Materialia, 158, pp. 6-10, (2019)

[4] Tian Chaobo, Yang Xinqi, Li Shengli, Et al., High temperature creep behavior of friction stir welding joints for CLAM steel, Transactions of the China Welding Institution, 42, 2, pp. 38-45, (2021)

[5] Gao Heng, Song Yuanyuan, Zhao Mingjiu, Et al., Effects of tempering on the microstructure and mechanical property of electron beam welding joint of 9Cr2WVTa steel, Acta Metallurgica Sinica, 50, 12, pp. 1429-1436, (2014)

[6] Rouzbehani R., Kokabi A H, Sabet H, Et al., Metallurgical and mechanical properties of underwater friction stir welds of Al7075 aluminum alloy[J], Journal of Materials Processing Technology, 262, pp. 239-256, (2018)

[7] Mofid M A, Abdollah Z A, Malek G F., The effect of water cooling during dissimilar friction stir welding of Al alloy to Mg alloy[J], Materials and Design, 36, pp. 161-167, (2011)

[8] Mofid M A, Abdollah Z A, Gur C H., Submerged friction-stir welding (SFSW) underwater and under liquid nitrogen: An improved method to join Al alloys to Mg alloys, Metallurgical and Materials Transactions, 43, 13, pp. 5106-5114, (2012)

[9] Mofid M A, Abdollah Z A, Gur C H., Investigating the formation of intermetallic compounds during friction stir welding of magnesium alloy to aluminum alloy in air and under liquid nitrogen[J], The International Journal of Advanced Manufacturing Technology, 71, 5-8, pp. 1493-1499, (2014)

[10] Mudawar I, Estes K A., Optimizing and predicting CHF in spray cooling of a square surface, Journal of Heat Transfer: Transaction of the ASME, 118, 3, pp. 672-679, (1996)