Design of Fiber-Optic Current Transformer Based on Passive Phase Modulator

被引：1

作者：

Qi Y. ^{[1
,2
]}

Feng Q. ^{[1
]}

Zhang J. ^{[1
]}

Zhang X. ^{[1
]}

Wang M. ^{[1
]}

Tian D. ^{[3
]}

Li W. ^{[4
]}

机构：

[1] School of Information Science and Engineering, Yanshan University, Qinhuangdao, 066004, Hebei

[2] Key Laboratory for Special Fiber and Fiber Sensor of Hebei Province, Qinhuangdao, 066004, Hebei

[3] Key Laboratory for Microstructural Material Physics of Hebei Province, School of Science, Yanshan University, Qinhuangdao, 066004, Hebei

[4] China Electronic Engineering Design Institute Co. Ltd., Beijing

来源：

Guangxue Xuebao/Acta Optica Sinica | 2019年 / 39卷 / 04期

关键词：

Fiber optics; Fiber-optic current transformer; Phase modulator; Sagnac interferometer; Temperature compensation;

D O I：

10.3788/AOS201939.0406004

中图分类号：

学科分类号：

摘要：

Based on the phase delay function of a quarter-wave plate and combined with a polarizer and a Faraday rotator, a nonreciprocal phase modulator is proposed for the Sagnac loop, which integrates the functions of polarization and phase delay. The proposed structure fundamentally eliminates the influence of delay coil on system sensitivity, and reduces the complexity and volume of the whole system. The measured relative insertion loss of this phase modulator is 3.6 dB, and the relative phase offset angle is 89.9605°. The experimental results are well consistent with the theoretical analysis results. A variable ratio error self-compensation technology is proposed. In the range of -40~40 ℃, according to the different fabrication process, the minimum variation ratio error of the system is no more than ±0.02% when the temperature changes. © 2019, Chinese Lasers Press. All right reserved.

引用

共 19 条

[1] Li C.S., Zhang C.X., Wang X.X., Et al., Key techniques of reflective Sagnac interferometer-type fiber optic current transformers, Automation of Electric Power Systems, 37, 12, (2013)
[2] Sasaki K., Takahashi M., Hirata Y., Temperature-insensitive Sagnac-type optical current transformer, Journal of Lightwave Technology, 33, 12, pp. 2463-2467, (2015)
[3] Xiao Z.H., Cheng S., Zhang G.Q., Et al., Research on sensitivity characteristic of fiber optic current transformer, Electric Power Automation Equipment, 37, 1, pp. 212-216, (2017)
[4] Liu T.G., Yu Z., Jiang J.F., Et al., Advances of some critical technologies in discrete and distributed optical fiber sensing research, Acta Physica Sinica, 66, 7, (2017)
[5] Koo K.P., Tveten A.B., Dandridge A., Passive stabilization scheme for fiber interferometers using (3×3) fiber directional couplers, Applied Physics Letters, 41, 7, pp. 616-618, (1982)
[6] Sheem S.K., Giallorenzi T.G., Koo K., Optical techniques to solve the signal fading problem in fiber interferometers, Applied Optics, 21, 4, (1982)
[7] He C.F., Ruan L., Feng H., Et al., Experimental study on pipeline security monitoring system based on ring-structure Sagnac interferometer with 3×3 coupler, Journal of Optoelectronics•Laser, 26, 6, pp. 1125-1131, (2015)
[8] Jiao B.L., Wang C.H., Zheng S.X., 3×3 coupler based Sagnac interferometric optical fiber current sensor configuration, Laser & Infrared, 34, 4, pp. 298-301, (2004)
[9] Yu D.Y., Tan H.Y., Engineering Optics, pp. 494-499, (2011)
[10] Luo W., Geng C., Li X.Y., Measurement of phase-shift coefficient of piezoelectric fiber optic phase modulator, High Power Laser and Particle Beams, 24, 7, pp. 1641-1644, (2012)

← 1 2 →