Testing method study on fatigue crack propagation behavior of CRO specimen

被引：0
|
作者：
Zhao X.-H. [1 ]
Cai L.-X. [1 ]
Bao C. [1 ]
机构：
[1] Applied Mechanics and Structure Safety Key Laboratory of Sichuan Province, School of Mechanics and Engineering, Southwest Jiaotong University, Chengdu, 610031, Sichuan
来源：
Cai, Li-Xun (lix_cai@263.net) | 1600年 / Tsinghua University卷 / 33期
关键词：
5083-H112 aluminum alloy; C250 maraging steel; Compliance method; CRO specimen; Fatigue crack propagation; Solid mechanics;
D O I：
10.6052/j.issn.1000-4750.2015.04.0291
中图分类号：
学科分类号：
摘要：
Recognizing the large size requirement and high cost associated with the test of the standard specimens such as compact tension (CT) and single edged notched bending (SEB) specimen, a testing method for fatigue crack propagation of small size C-ring specimen with an outer radial crack (CRO) has been developed. With finite element analyses, expressions of stress intensity factor and crack length based on compliance principle were established with good accuracy. A type of 5083-H112 aluminum alloy was employed to complete the tests of fatigue crack growth rate by using CRO and CT specimens, respectively. Correspondingly, the power exponent of Paris equation of the two types of specimens were also obtained. The comparison shows that the fatigue crack propagation behaviors of CRO and CT specimens are similar, implying that the new method is valid and effective. Based on the above method, the fatigue crack propagation of two CRO samples of C250 steel with different thicknesses has been studied. © 2016, Engineering Mechanics Press. All right reserved.
引用
收藏
页码：20 / 28
页数：8
相关论文
共 22 条
  • [1] Tang X., Zhao X., Multiscaling analysis approach of fatigue crack growth behavior, Engineering Mechanics, 29, 10, pp. 20-26, (2012)
  • [2] Chen L., Cai L., The low cyclic fatigue crack growth prediction model based on material's low cyclic fatigue properties, Engineering Mechanics, 29, 10, pp. 34-39, (2012)
  • [3] Gong M., Zhao J., Dong B., Et al., Initiation and propagation of fatigue crack in edge region of hole in a sheet with central hole, Acta Aeronautica et Astronautica Sinica, 23, 3, pp. 202-205, (2002)
  • [4] Guo J., Yin Z., Wang H., Et al., Effects of minor Sc and Zr on fatigue crack development characteristics of 2524SZ alloy sheet, The Chinese Journal of Nonferrous Metals, 20, 5, (2010)
  • [5] Zou S., Wang J., Wang H., Et al., Fatigue growth rate of laser shock processed metal sheet, Laser Technology, 26, 3, pp. 189-191, (2002)
  • [6] Zhao R., Luo X., Ren L., Et al., Research on fatigue crack propagation behavior of GH4133B superalloy used in turbine disk of aero-engine, Journal of Mechanical Engineering, 47, 18, pp. 55-65, (2011)
  • [7] Xiong Y., Chen B., Zheng S., Et al., Study on fatigue crack growth behavior of 16MnR steel under different conditions, Acta Metallurgica Sinica, 45, 7, pp. 849-855, (2009)
  • [8] Yang J., Dong J., Zhang M., Et al., High temperature fatigue crack growth behavior of a novel powder metallurgy superalloy FGH98, Acta Metallurgica Sinica, 49, 1, pp. 71-80, (2013)
  • [9] Yang S., Yi D., Yang S., Et al., Effect of corrosive environment on fatigue crack propagation of 2E12 aerospace aluminum alloy, Journal of Materials Engineering, 12, pp. 26-29, (2007)
  • [10] Bu W., Sun P., Fatigue crack growth in X70 line-pipe steel in a carbonate-bicarbonate solution, Oil Field Equipment, 35, 1, pp. 73-76, (2006)
123