Stability of composite stiffened panels under compression

被引：0
|
作者：
Shi J. [1 ]
Zhao J. [2 ]
Liu C. [1 ]
Li D. [1 ]
机构：
[1] Beijing Aeronautical Science & Technology Research Institute of Commercial, Aircraft Corporation of China, LTD., Beijing
[2] Beijing ROCOSN Engineering Management CO. LTD., Beijing
来源：
Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2020年 / 37卷 / 06期
关键词：
Arc-length method; Buckling; Compression stability; Eigenvalue; Engineering method; Stiffened panels;
D O I：
10.13801/j.cnki.fhclxb.20190917.003
中图分类号：
学科分类号：
摘要：
Experiments for compression stability analysis were conducted on composite stiffened panels SC-1 and SC-2 with different T-stringer lay-ups. A proposed engineering method was introduced to predict the buckling load and the least post-buckling carrying capability, and finite element analysis with eigenvalue method and arc-length method were carried out to investigate the bucking load, buckling mode, and post-buckling carrying capability. Experiment results show that SC-1 with more stringer ply-ups possess the higher local bucking strain of skin and the higher buckling load of the panel, and SC-2 can sustain a post-buckling carrying capability of 2.4 times of buckling load without material damage and stringer-skin debonding. The engineering method and eigenvalue method acquire the buckling loads of the panels with errors of -9.3% and -2.8% respectively, and the minimum post-buckling carrying capability of SC-2 is 2.09 times of experimental buckling load by engineering method. The errors of buckling loads by arc-length method are less than 1% for both SC-1 and SC-2, and the buckling modes and distortion are well trailed with load increasing. © 2020, Editorial Office of Acta Materiae Compositae Sinica. All right reserved.
引用
收藏
页码：1321 / 1333
页数：12
相关论文
共 34 条
  • [1] MA X Q, YANG Z J, GU Y Z, Et al., Manufacture and characterization of carbon fibre composite stiffened skin by resin film infusion/prepreg co-curing process[J], Journal of Reinforced Plastics and Composites, 33, 17, pp. 1559-1573, (2014)
  • [2] HUANG C K., Study on co-cured composite panels with blade-shaped stiffeners, Composites Part A: Applied Science and Manufacturing, 34, 5, pp. 403-410, (2003)
  • [3] SERESTA O, GURDAL Z, ADAMS D B, Et al., Optimal design of composite wing structures with blended laminates, Composites Part B: Engineering, 38, 4, pp. 469-480, (2007)
  • [4] ZHOU Leimin, SUN Pei, Boeing 787 composites' international manufacturing, Hi-Tech Fiber & Application, 38, 2, pp. 57-61, (2013)
  • [5] WU Zhien, Manufacture of A350 composites structure, Aeronautical Manufacturing Technology, 13, pp. 32-35, (2013)
  • [6] HUO Shihui, WANG Fusheng, WANG Peiyan, Et al., Stability analysis on the ribbed panel of the composite wing, Chinese Journal of Applied Mechanics, 27, 2, pp. 423-428, (2010)
  • [7] ZHAN Quanwei, FAN Xueling, XU Honglu, Influence analysis on the stability of composite ribbed panel, Machinery Design & Manufacture, 3, pp. 37-39, (2012)
  • [8] PEI Jinli, CHEN Xiuhua, Research on stability of hat-stiffened composites structures, Aeronautical Compu-ting Technique, 41, 6, pp. 84-87, (2011)
  • [9] ZHENG Jie, REN Shan, Study on stability analysis method of composite stiffened plates, Aeronautical Science & Technology, 26, 3, pp. 44-48, (2015)
  • [10] MU Penggang, WAN Xiaopeng, ZHAO Meiying, A study of the stability of composite stiffened plates, Mechanical Science and Technology for Aerospace Engineering, 28, 9, pp. 1190-1193, (2009)
1234