Optimization analysis of preload based on space bearing life prediction

被引：0

作者：

Ning F.-P. ^{[1
,3
]}

Yao J.-T. ^{[1
,2
]}

Teng Z.-C. ^{[1
]}

An J.-T. ^{[1
]}

Zhao Y.-S. ^{[1
,2
]}

机构：

[1] Parallel Robot and Mechatronic System Laboratory of Hebei Province, Yanshan University, Qinhuangdao

[2] Key Laboratory of Advanced Forging & Stamping Technology and Science, Yanshan University, Qinhuangdao

[3] College of Mechanical and Power Engineering, North University of China, Taiyuan

来源：

Gongcheng Lixue/Engineering Mechanics | 2016年 / 33卷 / 12期

关键词：

Bearing; Lifetime; Optimization; Preload; Wear;

D O I：

10.6052/j.issn.1000-4750.2015.04.0317

中图分类号：

学科分类号：

摘要：

The research the object is precision shafting in spacecraft mechanism. The Life prediction mathematical model of space bearing is established and the method for optimizing the initial preload of solid lubrication bearing is proposed. It provides theoretical guidance for the design and selection of the bearing preload. Based on the kinematics, quasi-static analysis of the rolling bearing and Archard wear model, the requirements for the stiffness and ultimate pressure resistant bearing capacity of lubricating layers are considered. Thus, the allowable range of preload is determined. With the optimization objective of the longest service life, the initial preload of the space bearing 71807C is optimized. The results indicate that the selection range of the initial preload for space bearing is from 70 N to 200 N. During the wear process, there is a correlation between the wear depth and residual preload. Based on the longest lifetime optimization, the optimal initial preload of the precision shafts system is obtained, which is 156 N. The failure mechanism of the bearing is analyzed under various preloads. © 2016, Engineering Mechanics Press. All right reserved.

引用

页码：225 / 231

页数：6

共 23 条

[1] Yu D., Yang J., The Spacecraft Mechanism Technology, pp. 27-31, (2011)
[2] Chen Z., Zeng J., Effect of rotor vibration of traction motor on dynamic behavior of high speed train, Engineering Mechanics, 28, 1, pp. 238-244, (2011)
[3] Archard J.F., Contact and rubbing of flat surfaces, Journal of Applied Physics, 24, 8, pp. 981-988, (1953)
[4] Bayer R.G., Mechanical wear prediction and prevention, Marcel Dekker, 40, 2, pp. 214-218, (1994)
[5] Kragelsky I.V., Dobychin M.N., Basic Friction and Wear Tests, (1977)
[6] El-Thalji I., Jantunen E., A descriptive model of wear evolution in rolling bearings, Engineering Failure Analysis, 45, pp. 204-224, (2014)
[7] Wang L., Failure analysis of rotor bearing of OE spinning machine and wear mechanism, Tribology, 12, 3, pp. 212-221, (1992)
[8] Qu Z., Wang X., Dou Y., Et al., Stability criterion of eccentric worn casing under nonuniform external loadings, Engineering Mechanics, 32, 7, pp. 249-255, (2015)
[9] Pu C., Xu B., Wang H., Et al., Wear lifetime of 3Cr13 stainless steel coating under various loads, Tribology, 30, 1, pp. 75-79, (2010)
[10] Singer I.L., Fayeulle S., Ehni P.D., Wear behavior of triode-sputtered MoS<sub>2</sub> coatings in dry sliding contact with steel and ceramics, Wear, 195, 1, pp. 7-20, (1996)

← 1 2 3 →