Experimental study on the mechanical performance of angle shear connectors with and without concrete gaps

被引：0
|
作者：
Tang L. [1 ]
Fan J.-S. [2 ,3 ]
Nie J.-G. [2 ,3 ]
Qiu S.-Y. [2 ,3 ]
Xu G.-P. [1 ]
Song S.-Y. [4 ]
机构：
[1] CCCC Highway Consultants Co., Ltd., Beijing
[2] Key Laboratory of Structural Engineering and Vibration of China Education Ministry, Tsinghua University, Beijing
[3] Beijing Engineering Research Center of Steel and Concrete Composite Structures, Tsinghua University, Beijing
[4] Guangdong Highway Design Institute Co., Ltd., Guangzhou
来源：
Gongcheng Lixue/Engineering Mechanics | 2020年 / 37卷 / 10期
关键词：
Angle shear connectors; Concrete gap; Push-out tests; Shear performance; Steel-shell immersed tunnels;
D O I：
10.6052/j.issn.1000-4750.2019.10.0621
中图分类号：
学科分类号：
摘要：
Because it is difficult for the flow, vibration and gas exhaust of concrete, gaps may exist near the welded regions of angle shear connectors. Based on the engineering practice and standard provisions, a test on nine groups of full-scale push-out specimens of three different gap depths (0, 10 mm and 20 mm) was conducted. To reduce the discreteness, there were three duplicate specimens in each group. All specimens failed in concrete crushing in the test. Compared with the specimens without a gap, the crushing area was smaller and the deformation of the angle steel was larger in the specimens with a gap. The concrete gap had a significant influence on the strength and stiffness of the angle shear connectors. Compared with that of the specimens without a gap, the strength was decreased by 16.5% and 37.5% and the stiffness was decreased by 48.4% and 70.6% for the specimens with a gap of 10 mm and 20 mm, respectively. Different formulas in the literature were verified based on 62 groups of specimens in other papers and 3 groups of specimens in the current test. The formula proposed by Kiyomiya and Kimura was found to have good accuracy and small discreteness, while the formula proposed by 《Design Code for Steel-Concrete Sandwich Structures》in Japan was conservative. A new shear strength empirical formula was proposed based on the existing experimental data, which showed better accuracy and applicability. Based on the new shear strength formula and a mechanical model considering the concrete gap, a shear strength corrected formula for angle shear connectors with concrete gaps was proposed. The proposed corrected formula was verified based on 3 groups of specimens in other papers and 6 groups of specimens in the current test and was found to have good accuracy and small discreteness. Copyright ©2020 Engineering Mechanics. All rights reserved.
引用
收藏
页码：45 / 55and115
相关论文
共 30 条
  • [1] Song Jian, Chen Bailing, Advantages of immersed tube tunnel option in river- or gulf-crossing, Modern Tunneling Technology, 42, 3, pp. 28-30, (2005)
  • [2] Grantz W C., Steel-shell immersed tunnels—Forty years of experience [J], Tunnelling and Underground Space Technology, 12, 1, (1997)
  • [3] Akimoto K, Hashidate Y, Kitayama H, Et al., Immersed tunnels in Japan: Recent technological trends [C], Proceedings of the 2002 Interntional Symposium on Underwater Technology (Cat. No. 02EX556), pp. 81-86, (2002)
  • [4] Shariati A, RamliSulong N H, Shariati M., Various types of shear connectors in composite structures: A review [J], International Journal of Physical Sciences, 7, 22, pp. 2876-2890, (2012)
  • [5] Wang Wei, Zhao Chunlei, Su Sanqing, Et al., Experimental study on bond-slip behavior and bearing capacity of corrugated steel plate concrete composite member with stud, Engineering Mechanics, 36, 9, pp. 108-119, (2019)
  • [6] Wang Weian, Li Qiao, Zhao Canhui, Et al., Study on load-slip characteristic curve of perfobond shear connectors in hybrid structures, Engineering Mechanics, 32, 3, pp. 57-65, (2015)
  • [7] Yang Yong, Chen Yang, Experimental study on the shear capacity of PBL shear connectors, Engineering Mechanics, 35, 9, pp. 89-96, (2018)
  • [8] Shariati M, Sulong N H R, Suhatril M, Et al., Comparison of behaviour between channel and angle shear connectors under monotonic and fully reversed cyclic loading [J], Construction and Building Materials, 38, pp. 582-593, (2013)
  • [9] Wei Wenqi, Chen Zhenqing, A test research on shrinkage and creep for micro-expansive concrete filled steel tubular of Maocaojie bridge, Journal of Lanzhou Railway University, 22, 3, pp. 62-65, (2003)
  • [10] Komon T, Suzuki Y, Wako T, Et al., Characteristics of powder type high fluidity concrete for filling into submerged tunnel full sandwich structure, Annual Report on Concrete Engineering, 17, 1, pp. 191-196, (1995)
123