Study on the catalytic denitrification performance of low-temperature NH3-SCR over LaMnO3/biochar catalyst

被引：0

作者：

Fan X. ^{[1
,2
]}

Hao L. ^{[1
]}

Fan C. ^{[1
]}

Li S. ^{[1
]}

机构：

[1] State Key Laboratory of Multi-phase Complex System, Institute of Process Engineering, Chinese Academy of Science, Beijing

[2] Sino Danish College, University of Chinese Academy of Science, Beijing

来源：

Huagong Xuebao/CIESC Journal | 2023年 / 74卷 / 09期

关键词：

biochar; denitration; perovskite oxide; selective catalytic reduction; steady-state dynamics;

D O I：

10.11949/0438-1157.20230455

中图分类号：

学科分类号：

摘要：

Selective catalytic reduction with ammonia (NH3-SCR) is one of the most widely adopted technology to reduce the emission of nitrogen oxides. The activity and stability of catalyst plays a major role in the denitration process, and the increasing requirements for low working temperature, strong SO2/H2O resistance capability have stimulated the development of new type NH3-SCR catalyst. In this work, La-Mn perovskite oxide as active component and porous biochar as support were introduced to a biochar-supported catalyst, LMO/BCNA. The catalytic performance and SO2/H2O resistance of catalysts was tested in a fixed bed reactor. NO conversion achieved over 80% and N2 selectivity was over 90% within the temperature range of 100—250℃, and the highest NO conversion reached 95.8% with N2 selectivity of 95.4% at 225℃ . Compared to LMO, LMO/biochar catalyst significantly improved denitration efficiency and widened working temperature window due to the synergistic catalytic effect of biochar. The introduction of biochar carrier weakens the catalyst’s adsorption of H2O and SO2, and enhances sulfur and water resistance. The kinetic model was built based on steady-state dynamics. On the test conditions and the presence of 5% O2, the NH3-SCR reaction order with respect to NO, O2 and NH3 was 0.66, 0 and 0, respectively. Accordingly, the activation energy for LMO/BCNA was 25.52 kJ/mol, which was much lower than that for commercial vanadium-wolframium-titanium catalysts of 40—94 kJ/mol. © 2023 Chemical Industry Press. All rights reserved.

引用

页码：3821 / 3830

页数：9

共 31 条

[1] Emission standard of air pollutants for thermal power plants: GB 13223—2011, (2012)
[2] Limits and measurement methods for emissions from light-duty vehicles (CHINA 6): GB 18352.6—2016, (2020)
[3] Kobayashi M, Miyoshi K., WO3-TiO2 monolithic catalysts for high temperature SCR of NO by NH3: influence of preparation method on structural and physico-chemical properties, activity and durability, Applied Catalysis B: Environmental, 72, 3, pp. 253-261, (2007)
[4] Liu Z M, Zhang S X, Li J H, Et al., Novel V2O5-CeO2/TiO2 catalyst with low vanadium loading for the selective catalytic reduction of NOx by NH3, Applied Catalysis B: Environmental, 158, 159, pp. 11-19, (2014)
[5] Han L P, Cai S X, Gao M, Et al., Selective catalytic reduction of NOx with NH3 by using novel catalysts: state of the art and future prospects, Chemical Reviews, 119, 19, pp. 10916-10976, (2019)
[6] Li J H, Yang X, Chang H Z, Et al., Developmet and Application of Key Technologies for Selective Catalytic Reduction of NOx from Flue Gas, (2015)
[7] Zhu H Y, Zhang P F, Dai S., Recent advances of lanthanum-based perovskite oxides for catalysis, ACS Catalysis, 5, 11, pp. 6370-6385, (2015)
[8] Kim Y K, Hao L F, Park J I, Et al., Catalytic activity and activation mechanism of potassium carbonate supported on perovskite oxide for coal char combustion, Fuel, 94, pp. 516-522, (2012)
[9] Royer S, Duprez D, Can F, Et al., Perovskites as substitutes of noble metals for heterogeneous catalysis: dream or reality, Chemical Reviews, 114, 20, pp. 10292-10368, (2014)
[10] Jablonska M, Palkovits R., Perovskite-based catalysts for the control of nitrogen oxide emissions from diesel engines, Catalysis Science & Technology, 9, 9, pp. 2057-2077, (2019)

← 1 2 3 4 →