Electromagnetic Property of Honeycomb Absorbing Composites with Lossy Frequency Selective Surface

被引:0
|
作者
Chen Y. [1 ,2 ]
Zu Y. [1 ]
Gong J. [1 ]
Sun C. [1 ]
Wang C. [3 ]
机构
[1] Institute of Metal Research, Chinese Academy of Sciences, Shenyang
[2] University of Chinese Academy of Sciences, Beijing
[3] Altair Engineering Software (Shanghai) Co. Ltd., Shanghai
关键词
Electromagnetic property; Equivalent capacitance; Equivalent inductance; Loss FSS; Metallic materials; Microwave absorbing honeycomb composites;
D O I
10.11901/1005.3093.2017.678
中图分类号
学科分类号
摘要
The honeycomb absorbing composites with light weight, high strength and broadband absorbing property had been designed by combination of aramid honeycomb and lossy frequency selective surface composite. The effect of the thickness of honeycomb and the configuration of lossy frequency selective surface on electromagnetic performance was investigated, while the electromagnetic absorbing principle of the lossy frequency selective surface with traditional aperture was analyzed by the equivalent circuit method, and of which the deficiency in broadband absorbing was also proposed. In order to resolve the structure with none equivalent capacitance, slots were made on the lossy frequency selective surface with traditional aperture. Consequently, there have been another absorption peak in low frequency, and the high frequency absorption performance kept unchanged. Correspondingly the low frequency absorption performance was greatly improved, thus the whole absorbing performance of the very configuration was greatly improved, and the absorbing bandwidth had been broadened more than one time. Through calculating the equivalent capacitance and inductance by matlab, it follows that as the width of square ring changed,the equivalent inductance varied accordingly,but the equivalent capacitance remain unchanged; The high frequency absorption peaks were mainly affected by the equivalent inductance, and the low frequency absorption peaks were mainly affected by the equivalent capacitance. The thickness of honeycomb mainly affected the low frequency absorption peak and the position of high frequency absorption peak. According to the above characteristics, a thickness of 6mm broadband honeycomb absorbing composites had been designed with the slotted lossy frequency selective surface in front of the honeycomb medium, which presented an absorbing bandwidth 14 GHz of -10 dB. The actual test result basically accorded with the design expectation. © All right reserved.
引用
收藏
页码:567 / 574
页数:7
相关论文
共 23 条
  • [1] He Y.F., Gong R.Z., Wang X., Et al., Study on equivalent electromagnetic parameters and absorbing properties of honeycomb-structured absorbing materials, Acta Phys. Sin., 57, (2008)
  • [2] Gong Y.X., Ou Q.D., Zhao H.J., Et al., Genetic algorithm optimization and microwave absorption performance of multilayer honeycomb composites, 17th National Conference on Composite Materials, (2012)
  • [3] Chang X., Research on equivalent electromagnetic parameters and reflection parameters of honeycomb absorbing materials, (2014)
  • [4] Munk B.A., Frequency Selective Surfaces: Theory and Design, (2000)
  • [5] Li J.Z., Tian H., Liu H.T., Et al., Design and verification of a radar-infrared stealth-compatible material based on metamaterial, J. Funct. Mater., 48, (2017)
  • [6] Liu T., Kim S.S., Design of wide-bandwidth electromagnetic wave absorbers using the inductance and capacitance of a square loop-frequency selective surface calculated from an equivalent circuit model, Opt. Commun., 359, (2016)
  • [7] Xu H.B., Bie S.W., Xu Y.S., Et al., Broad bandwidth of thin composite radar absorbing structures embedded with frequency selective surfaces, Composites, 80A, (2016)
  • [8] Yang Z.N., Luo F., Zhou W.C., Et al., Design of a thin and broadband microwave absorber using double layer frequency selective surface, J. Alloys Compd., 699, (2017)
  • [9] Yuan W., Chen Q., Xu Y.S., Et al., Broadband microwave absorption properties of ultrathin composites containing edge-split square-loop FSS embedded in magnetic sheets, IEEE Antennas Wirel. Propag. Lett., 16, (2017)
  • [10] Costa F., Monorchio A., Manara G., A circuit-based model for the interpretation of perfect metamaterial absorbers, IEEE Trans. Antennas Propag, 61, (2012)