An analytical calculation method of quasi-stationary three-dimensional electromagnetic field created by the arbitrary current contour that located near conducting body

被引:0
|
作者
Vasetsky Y.M. [1 ]
Dziuba K.K. [1 ]
机构
[1] Institute of Electrodynamics, National Academy of Sciences of Ukraine, pr. Peremohy, 56, Kyiv
来源
Technical Electrodynamics | 2017年 / 2017卷 / 05期
关键词
Arbitrary spatial current contour; Eddy currents; Quasi-stationary three-dimensional electromagnetic field;
D O I
10.15407/techned2017.05.007
中图分类号
学科分类号
摘要
On the basis of the analytical decision of problem on a field of radiating harmonious current dipole the analytical calculation method of quasi-stationary three-dimensional electromagnetic field created by arbitrary spatial current contour, located near conducting body with a flat surface is developed. The analytical decision taking into account closed current contour is found for vector potential, induction of magnetic field and intensity of electric field in dielectric and conducting media without limitations on contours geometry, media properties and current frequency It is established, that the current density in the conducting medium has no component directed perpendicularly to flat surface of body for any initial current system and for any dependence of currents on time. As consequence, the perpendicular component of electric field intensity on a surface of the dielectric medium and surface density of electric charge do not depend on properties of the conductive medium and they are defined only by a vertical component of the induced electric field of the initial currents at any dependence on time.
引用
收藏
页码:7 / 17
页数:10
相关论文
共 22 条
  • [1] Study of quasi-stationary electromagnetic field near three-dimensional corner of conducting body
    Pawlowski, Stanislaw
    Plewako, Jolanta
    PRZEGLAD ELEKTROTECHNICZNY, 2011, 87 (08): : 96 - 101
  • [2] Simplified mathematical model of three-dimensional electromagnetic field of arbitrary current system near conducting body
    Vasetsky Y.M.
    Technical Electrodynamics, 2020, (03): : 3 - 8
  • [3] Quasi-stationary electromagnetic field simulation near a conducting non-ferromagnetic body by the MOEC testing method
    Filippov, Dmitrii
    Lugovskoy, Nazar
    Berzhansky, Vladimir
    Kazak, Anatoliy
    Oleinikov, Nikolay
    Shuyskyy, Alexandr
    Syedneva, Daria
    MEASUREMENT, 2025, 250
  • [4] Analytical determination of a quasi-stationary electromagnetic field created by magnetic moments and eddy currents in conducting half-space
    Vasetsky, Yu. M.
    ELECTRICAL ENGINEERING & ELECTROMECHANICS, 2024, (03) : 48 - 54
  • [5] Exact Analytical And Approximate Asymptotic Calculation Methods To Determine Three-Dimensional Electromagnetic Field Near Conducting Body With Flat Surface
    Vasetsky, Yu.M.
    Technical Electrodynamics, 2021, 2021 (04): : 3 - 13
  • [6] Calculation of the induced electromagnetic field created by an arbitrary current distribution located outside a conductive cylinder
    Grimberg, R
    Radu, E
    Mihalache, O
    Savin, A
    JOURNAL OF PHYSICS D-APPLIED PHYSICS, 1997, 30 (16) : 2285 - 2291
  • [7] Three-dimensional calculation of the magnetic field created by current-carrying massive disks
    Azzerboni, B
    Saraceno, GA
    Cardelli, E
    IEEE TRANSACTIONS ON MAGNETICS, 1998, 34 (05) : 2601 - 2604
  • [8] Extended stationary phase method based on Fresnel functions for the calculation of three-dimensional scattering of electromagnetic waves from rectangular perfectly conducting plates
    Moschovitis, C. G.
    Frangos, P. V.
    Anstassiu, H. T.
    PROCEEDINGS OF THE INTERNATIONAL CONFERENCE DAYS ON DIFFRACTION 2008, 2008, : 134 - +
  • [9] Direct calculation of flux density and eddy current density in the analysis of three-dimensional electromagnetic field
    Mazgaj, Witold
    Archives of Electrical Engineering, 2008, 57 (223): : 23 - 40
  • [10] A GPU-Based Calculation Using the Three-Dimensional FDTD Method for Electromagnetic Field Analysis
    Nagaoka, Tomoaki
    Watanabe, Soichi
    2010 ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY (EMBC), 2010, : 327 - 330