State searching machining technique for curved surface parts

被引：0
|
作者：
Zhou, Kai [1 ]
Liu, Xirong [1 ]
机构：
[1] Tsinghua Univ, Beijing, China
来源：
Qinghua Daxue Xuebao/Journal of Tsinghua University | 2000年 / 40卷 / 05期
关键词：
Computer software - Control - Surfaces;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A state searching machining technique was developed to solve machining problems for complex curved surface parts that can not be accurately located. Feasible approaches were presented to solve key problems such as automatic state searching of curved surface parts and adaptive machining control based on acquired real state information. The control software for state searching machining for curved surface parts was developed and experimentally verified. Theoretical analysis and experimental results show that the proposed method effectively enables locating-free machining of curved surface parts.
引用
收藏
页码：40 / 43
相关论文
共 50 条
  • [1] The Research about Machining Technique of the Parts with Complex Curved Surfaces by WEDM
    Wang, Xinrong
    Li, Xiaohai
    MATERIALS PROCESSING TECHNOLOGY, PTS 1-4, 2011, 291-294 : 373 - 376
  • [2] Strategy and Application of Modeling and NC Machining for Rotary Parts of Complex Curved Surface
    Liu, Weihong
    Liu, Haibo
    FRONTIERS OF MECHANICAL ENGINEERING AND MATERIALS ENGINEERING, PTS 1 AND 2, 2012, 184-185 : 477 - 481
  • [3] Research on intelligent localizing technique for complex curved surface parts grinding
    Zhou, K.
    Mao, D.Z.
    Liu, Y.
    Key Engineering Materials, 2001, 202-203 : 441 - 446
  • [4] Research on intelligent localizing technique for complex curved surface parts grinding
    Zhou, K
    Mao, DZ
    Liu, Y
    ADVANCES IN ABRASIVE PROCESSES, 2001, 202-2 : 441 - 446
  • [5] SURFACE PROFILE MEASUREMENTS OF CURVED PARTS
    BRISTOW, TC
    WAGNER, G
    BIETRY, JR
    AURIEMMA, RA
    SURFACE CHARACTERIZATION AND TESTING II, 1989, 1164 : 134 - 141
  • [6] MACHINING OF COMPLEX CURVED SURFACES IN SILICONIZED GRAPHITE PARTS.
    Pirogov, A.D.
    Paramei, O.L.
    Vasilenko, A.I.
    Ryzhakov, S.K.
    Lazar'ko, I.G.
    Chemical and Petroleum Engineering, 1986, 22 (08) : 403 - 404
  • [7] Surface Integrity for Machining Aerospace Parts
    Chu M.
    Ding R.
    Zhang S.
    Zheng J.
    Zhang N.
    Chu, Mingqiang (mingqiang.chu@ceamat.com); Zhang, Shuyan (shuyan.zhang@ceamat.com), 1600, Cailiao Daobaoshe/ Materials Review (35): : 7183 - 7189
  • [8] Machining of non-circular curved surface
    Li, Ming-Gui
    Xi'an Shiyou Xueyuan Xuebao/Journal of Xi'an Petroleum Institute (Natural Science Edition), 2004, 19 (02):
  • [9] New method for machining curved surface of piston
    Hsi An Chiao Tung Ta Hsueh, 3 (85-88):
  • [10] A parallel machining robot and its control method for high-performance machining of curved parts
    Xie, Zenghui
    Xie, Fugui
    Liu, Xin-Jun
    Wang, Jinsong
    Su, Hongyu
    ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 2023, 81
12345