Response Characteristics of Hypervelocity Ogive-nose Projectile Penetrating into Mortar Target

被引:0
|
作者
Gao F. [1 ]
Zhang G. [1 ]
Ji Y. [1 ]
Chen J. [1 ]
机构
[1] School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing
来源
Binggong Xuebao/Acta Armamentarii | 2020年 / 41卷 / 10期
关键词
Hypervelocity penetration; Mass loss; Mortar target; Penetration depth reduction; Penetration mechanism;
D O I
10.3969/j.issn.1000-1093.2020.10.007
中图分类号
学科分类号
摘要
To study the damage effects of mortar targets subjected to hypervelocity impact of kinetic-energy projectiles, the ogive-nose steel rods launched from a two-stage light gas gun were experimentally penetrated into mortar targets at 1 200-2 400 m/s. The linear dependences of cratering diameter and depth on the initial impact velocity are found from the experimental results. The penetration depth increases linearly first and then decreases sharply, and again increases slowly with the increase in impact velocity. Three penetration mechanisims, i. e., rigid penetration, semi-fracture penetration and fracture penetration, were observed, respectively, with the increase in impact velocity. A calculation model based on the internal friction penetration theory, in which the mass loss function of projectile is considered, is developed for predicting the penetration depths of rigid penetration and semi-fracture penetration. The calculated results were compared with the experimental results. The results indicate that the calculated results of the proposed model are in well agreement with the experimental results in terms of non-dimensional penetration depth. The special phenomenon of penetration depth reduction in the process of hypervelocity penetration is explained, and the inherent mechanism of variation law of penetration depth is further revealed. © 2020, Editorial Board of Acta Armamentarii. All right reserved.
引用
收藏
页码:1979 / 1987
页数:8
相关论文
共 19 条
  • [1] FAIR H., Hypervelocity then and now, International Journal of Impact Engineering, 5, pp. 1-11, (1987)
  • [2] ZHANG L J, LIU D S, YU C G, Et al., Hypersonic aircraft, Aero Weaponry, 2, pp. 13-16, (2010)
  • [3] REN H Q, MU C M, LIU R C, Et al., Penetration effects of precision guided weapons and engineering protection, (2016)
  • [4] HOHLER V, STILP A J., Penetration of steel and high density rods in semi-infinite steel targets, Proceedings of the 3rd International Symposium on Ballistics, (1977)
  • [5] HOHLER V, STILP A J., Hypervelocity impact of rod projectiles with L/D from 1 to 32, International Journal of Impact Engineering, 5, 1, pp. 323-331, (1987)
  • [6] PIEKUTOWSKI A J, FORRESTAL M J, POORMON K L, Et al., Penetration of 6061-T6511 aluminum targets by ogive-nose steel projectiles with striking velocities between 0. 5 and 3. 0 km/s, International Journal of Impact Engineering, 23, 1, pp. 723-734, (1999)
  • [7] FORRESTAL M J, PIEKUTOWSKI A J., Penetration experiments with 6061-T6511 aluminum targets and spherical-nose steel projectiles at striking velocities between 0. 5 and 3. 0 km/s, International Journal of Impact Engineering, 24, 1, pp. 57-67, (2000)
  • [8] WEN H M, LAN B., Analytical models for the penetration of semi-infinite targets by rigid, deformable and erosive long rods, Acta Mechanica Sinica, 26, 4, pp. 573-583, (2010)
  • [9] LI G, SONG C M, QIU Y Y, Et al., Theoretical and experimental studies on the phenomenon of reduction in penetration depth of hyper-velocity projectiles into granite, Chinese Journal of Rock Mechanics and Engineering, 37, 1, pp. 60-66, (2018)
  • [10] SONG C M, LI G, WANG M Y, Et al., Theoretical analysis of projectiles penetrating into rock targets at different velocities, Explosion and Shock Waves, 38, 2, pp. 250-257, (2018)