Comparative Analysis of Silicon Steel and Amorphous on the Performance of Permanent Magnet Synchronous Motors on Electric Vehicles

被引：0
|
作者：
Zhu J. [1 ]
Cao J. [1 ]
Liu R. [1 ]
Ding Y. [1 ]
机构：
[1] School of Electrical Engineering, Beijing Jiaotong University, Beijing
来源：
Liu, Ruifang (rfliu@bjtu.edu.cn) | 2018年 / China Machine Press卷 / 33期
关键词：
Amorphous; Efficiency MAP chart; Electric vehicle drive motor; Permanent magnet synchronous motor;
D O I：
10.19595/j.cnki.1000-6753.tces.L80576
中图分类号：
学科分类号：
摘要：
The design and manufacturing process of drive motors for electric vehicles is becoming more and more consummate. It is difficult to increase the efficiency of motors only by improving motor design. Amorphous alloy is a new type of functional material. It has the advantages of high magnetic permeability, low loss, and low coercive force. Applying it to the stator core of the motor can reduce stator iron loss and improve motor efficiency. In order to study the effect of amorphous and silicon steel on electric machines in electrical vehicles, the performance calculations of two identical structures and stator cores using silicon steel and amorphous permanent magnet synchronous motors were conducted in this paper. The comparison of silicon steel motors and amorphous motors was performed. The distribution of magnetic density and iron loss were calculated. Then two motors were tested to obtain the MAP of the efficiency. The results show that in the high speed region, the amorphous motor has the advantages of lower iron loss and higher efficiency than the silicon steel motor, while its advantage is less at low speed and high torque region. © 2018, Electrical Technology Press Co. Ltd. All right reserved.
引用
下载
收藏
页码：352 / 358
页数：6
相关论文
共 9 条
  • [1] Han X., Tong W., Tang R., Application of amorphous alloy in motor, Advanced Technology of Electrical Engineering and Energy, 33, 12, pp. 46-52, (2014)
  • [2] Yang D., The developing tendency of rare-earth permanent magnetism material and its application surrey in micromotors, Electronics Process Technology, 7, 3, pp. 186-190, (1997)
  • [3] Xu J., Zhang C., Feng J., Experiment research of permanent magnet synch-ronous traction motor for electric bus, High Power Converter Technology, 6, pp. 38-40, (2008)
  • [4] Wang L., Zhang G., Li S., Et al., Advantages and prospects of febased amorphous alloy materials applied in motor iron core, Metallic Functional Materials, 17, 5, pp. 58-62, (2010)
  • [5] Zhang B., Zhao D.Q., Pan M.X., Et al., Amorphous metallic plastic, Physical Review Letters, 94, 20, (2005)
  • [6] Kumar G., Tang H.X., Schroeres J., Nanomoulding with amorphous metals, Nature, 457, 7231, pp. 868-872, (2008)
  • [7] Wang Q., Lu J., Jiang S., Research summary of amorphous alloy motor, Electric Drive for Locomotives, 3, pp. 10-13, (2014)
  • [8] Ko H.-S., Kim K.-J., Characterization of noise and vibration sources in interior permanent-magnet brushless DC motors, IEEE Transactions on Magnetics, 40, 6, pp. 3482-3489, (2004)
  • [9] Yang Y., Wang X., Zhu C., Effect of slot opening on the cogging torque of permanent magnet synchronous motor, Electric Machines and Control, 15, 7, pp. 21-25, (2011)
1