Mercury selective adsorption characteristics and SO2 poison performance on CaO

被引：0

作者：

Li C. ^{[1
]}

Duan Y. ^{[1
]}

Tang H. ^{[1
]}

Zhu C. ^{[1
]}

Zheng Y. ^{[1
]}

Wei H. ^{[1
]}

机构：

[1] Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, School of Energy and Environment, Southeast University, Nanjing, 210096, Jiangsu

来源：

Huagong Xuebao/CIESC Journal | 2017年 / 68卷 / 09期

基金：

中国国家自然科学基金;

关键词：

CaO adsorbents; Elemental mercury; Mercuric chloride; Selective adsorption; Sulfur poisoning;

D O I：

10.11949/j.issn.0438-1157.20170343

中图分类号：

学科分类号：

摘要：

Using Ca(NO3)2 as a precursor and SiO2 as carrier, a supported CaO adsorbent was prepared. The selective adsorption performances of elemental mercury (Hg0) and mercuric chloride (HgCl2) of the sorbent were conducted in a fixed bed, and the effects of SO2 on CaO mercury adsorption process were also investigated. At the same time, combined with the program temperature desorption (TPD) and in situ diffuse reflectance infrared spectroscopy (in-situ DRIFT) characterization technology, the selective adsorption mechanism of CaO and the mechanism of SO2 poisoning were deeply investigated. The mercury adsorption results showed that CaO maintained a breakthrough of nearly 100% for Hg0 in pure N2 atmosphere and doped SO2 atmosphere, while HgCl2 manifested 66.0% and 60.3% adsorption efficiency in two atmospheres, respectively, indicating that there was a competitive adsorption relationship between SO2 and HgCl2 on CaO surface. The characterized results of CaO before and after adsorption suggested that as compared with Hg0, HgCl2 was able to form monodentate, bidentate and other adsorption structure with the basic sites on the CaO surface. SO2 and HgCl2 formed a competitive adsorption relationship in the active sites where the bridged bidentate was easily formed, resulting in the reduction of adsorption efficiency of HgCl2 on CaO. © All Right Reserved.

引用

页码：3565 / 3572

页数：7

共 30 条

[1] Wu F.Q., Liang Z., Wang Y.L., Et al., Study on the status of global atmospheric mercury emission inventory, The Administration and Technique of Environmental Monitoring, 27, 3, pp. 18-21, (2015)
[2] Wang Q.C., Shen W.G., Ma Z.W., The estimation of mercury emission from coal combustion in China, China Environmental Science, 19, 4, pp. 318-321, (1999)
[3] Zhu C., Duan Y.F., Yin J.J., Et al., Mercury adsorption by rice husk char sorbents modified by ammonium halide, Journal of Southeast University(Natural Science Edition), 43, 1, pp. 99-104, (2013)
[4] Zhou Q., Duan Y.F., Mao Y.Q., Et al., Kinetics and mechanism of activated carbon adsorption for mercury removal, Proceedings of the CSEE, 33, 29, pp. 10-17, (2013)
[5] Li Z.C., Duan Y.F., Wang Y.J., Et al., Mercury removal by ESP and WFGD in a 300 MW coal-fired power plant, Journal of Fuel Chemistry and Technology, 41, 4, pp. 491-498, (2013)
[6] Wang Z., Zhang B.K., Liu J., Et al., The influencing mechanism of H2O and SO2 on elemental mercury adsorption on MnO2 surface, Journal of Engineering Thermophysics, 37, 6, pp. 1335-1339, (2016)
[7] Zhong L., Xiao P., Jiang J.Z., Et al., Study on several measuring methods of mercury emission from coal-fired power plants, Proceedings of the CSEE, 32, pp. 158-163, (2012)
[8] Li H., Wang Q., Zhu F.H., The control requirements and monitoring methods for mercury emission in coal-fired power plants, Journal of Environmental Engineering Technology, 1, 3, pp. 226-231, (2011)
[9] Ren J.L., Zhou J.S., Luo Z.Y., Et al., Ca-based sorbents form mercury vapor removal from flue gas, Journal of Fuel Chemistry and Technology, 34, 5, pp. 557-561, (2006)
[10] Krishnan S.V., Bakhteyar H., Sedman C.B., Mercury sorption mechanisms and control by calcium-based sorbents, The 89th Air & Waste Management Association Annual Meeting, (1996)

← 1 2 3 →