Aging strengthening and mechanical properties of P and Ti microalloyed high strength steel

被引：0
|
作者：
Xiong, Daoli [1 ]
Mao, Weimin [1 ]
Wang, Li [1 ]
机构：
[1] Beijing Univ. of Sci. and Technol., Beijing 100083, China
来源：
Kang T'ieh/Iron and Steel (Peking) | 2001年 / 36卷 / 10期
关键词：
Aging of materials - Mechanical properties - Phosphorus - Strengthening (metal) - Titanium;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Aging strengthening and mechanical properties of P and Ti microalloyed high strength steel was investigated. It was shown that there is a significant effect of aging strengthening in the steel. Based on the aging strength and work hardening, the strength level of 1200 MPa and the elongation over 10% can be obtained. The combination of strength and elongation can be adjusted by the process parameters. The characteristics, microstructure and mechanical properties of this steel were discussed.
引用
收藏
页码：43 / 46
相关论文
共 50 条
  • [1] Effect of coiling temperature on the mechanical properties of Ti-microalloyed high strength steel
    Huo, Xiang-Dong
    Mao, Xin-Ping
    Dong, Feng
    Beijing Keji Daxue Xuebao/Journal of University of Science and Technology Beijing, 2013, 35 (11): : 1472 - 1477
  • [2] Microstructure and mechanical properties of hot rolled Mo-Ti microalloyed high strength steel
    The State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang, China
    Cailiao Rechuli Xuebao, 12 (145-151):
  • [3] EFFECT OF TEMPERING TEMPERATURE ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF HIGH Ti MICROALLOYED DIRECTLY QUENCHED HIGH STRENGTH STEEL
    Zhang Ke
    Yong Qilong
    Sun Xinjun
    Li Zhaodong
    Zhao Peilin
    Chen Shoudong
    ACTA METALLURGICA SINICA, 2014, 50 (08) : 913 - 920
  • [4] Mechanical Properties of TRIP Steel Microalloyed with Ti
    Daniel Krizan
    Bruno C. De Cooman
    Metallurgical and Materials Transactions A, 2014, 45 : 3481 - 3492
  • [5] Mechanical Properties of TRIP Steel Microalloyed with Ti
    Krizan, Daniel
    De Cooman, Bruno C.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2014, 45A (08): : 3481 - 3492
  • [6] Fatigue properties of Ti microalloyed high-strength steel by CSP process
    Tian, Xing
    Zhang, Yong-Kun
    Tan, Jia-Mei
    Kang, Yong-Lin
    Beijing Keji Daxue Xuebao/Journal of University of Science and Technology Beijing, 2014, 36 (06): : 780 - 786
  • [7] Effect of Final Rolling Temperature on Microstructure, Mechanical Properties, and Strengthening Mechanism of High-Strength Ti – Zr Composite Microalloyed Steels
    Yiyue Lai
    Hanyu Luo
    Chaoyong Xu
    Lisheng Yang
    Jinchang Zhang
    Jianchun Cao
    Xiaolong Zhou
    Xuegang Xiong
    Xiaoyu Ye
    Chuangwei Wang
    Metal Science and Heat Treatment, 2025, 66 (9) : 635 - 645
  • [8] Effect of Ti on the mechanical properties of high strength weathering steel
    Zhou, Jian
    Kang, Yonglin
    Mao, Xinping
    Lin, Zhenyuan
    Li, Liejun
    Chen, Wei
    Beijing Keji Daxue Xuebao/Journal of University of Science and Technology Beijing, 2006, 28 (10): : 926 - 930
  • [9] Effects of Partitioning Time and Temperature on the Microstructure and Mechanical Properties of a High Strength Microalloyed Steel
    Almasi, Ali
    Kianvash, Abbas
    Tutunchi, Abolfazl
    METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS, 2021, 10 (04) : 525 - 533
  • [10] Effects of Partitioning Time and Temperature on the Microstructure and Mechanical Properties of a High Strength Microalloyed Steel
    Ali Almasi
    Abbas Kianvash
    Abolfazl Tutunchi
    Metallography, Microstructure, and Analysis, 2021, 10 : 525 - 533
12345