Surface-particle-emulsion heat transfer model between fluidized bed and horizontal immersed tube

被引：0

作者：

Wu, Ping ^{[1
]}

Wang, Li ^{[1
]}

Feng, Xu ^{[1
]}

Ni, Xuezi ^{[1
]}

机构：

[1] Appl. Sci. Sch., Univ. of Sci. and Technol. Beijing, Beijing 100083, China

来源：

Journal of University of Science and Technology Beijing: Mineral Metallurgy Materials (Eng Ed) | 2002年 / 9卷 / 02期

关键词：

Emulsions - Fluidized beds - Mathematical models - Surface phenomena - Two phase flow;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

A mathematical model, surface-particle-emulsion heat transfer model, is presented by considering voidage variance in emulsion in the vicinity of an immersed surface. Heat transfer near the surface is treated by dispersed particles touching the surface and through the emulsion when the distance from the surface is greater than the diameter of a particle. A film with an adjustable thickness which separates particles from the surface is not introduced in this model. The coverage ratio of particles on the surface is calculated by a stochastic model of particle packing density on a surface. By comparison of theoretical solutions with experimental data from some references, the mathematical model shows better qualitative and quantitative prediction for local heat transfer coefficients around a horizontal immersed tube in a fluidized bed.

引用

页码：99 / 103

共 50 条

[1] Surface-particle-emulsion heat transfer model between fluidized bed and horizontal immersed tube
Ping Wu
2) Mechanical Engineering School
Journal of University of Science and Technology Beijing(English Edition), 2002, (02) : 99 - 103
[2] Surface-particle-emulsion heat transfer model between fluidized bed and horizontal immersed tube
Wu, P
Wang, L
Feng, X
Ni, XZ
JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING, 2002, 9 (02): : 99 - 103
[3] Surface-particle-emulsion model of heat transfer between a fluidized bed and an immersed surface
Wang, L
Wu, P
Ni, XZ
POWDER TECHNOLOGY, 2005, 149 (2-3) : 127 - 138
[4] Modeling of heat transfer between a high-temperature fluidized bed and an immersed surface by a surface-particle-emulsion model
Wang, Li
Wu, Ping
Yang, Jing
Ni, Xuezhi
CHEMICAL ENGINEERING SCIENCE, 2007, 62 (1-2) : 503 - 512
[5] Heat transfer between shallow fluidized bed and immersed horizontal tube
Tang, Dahai
Ren, Xiaohong
Rong, Shunxi
Gao Xiao Hua Xue Gong Cheng Xue Bao/Journal of Chemical Engineering of Chinese Universities, 11 (04): : 382 - 387
[6] An investigation on the heat transfer model for immersed horizontal tube bundles in a pressurized fluidized bed
Bao, Zhongkai
Duan, Lunbo
Wu, Ke
Zhao, Changsui
APPLIED THERMAL ENGINEERING, 2020, 170
[7] Study on heat transfer of immersed tube in a horizontal swirling fluidized bed
School of Power Engineering, Nanjing Normal University, Nanjing 210042, China
不详
Zhongguo Dianji Gongcheng Xuebao, 2007, 20 (65-70):
[8] HEAT TRANSFER BETWEEN A FLUIDIZED BED AND A HORIZONTAL TUBE
VREEDENBERG, HA
CHEMICAL ENGINEERING SCIENCE, 1958, 9 (01) : 52 - 60
[9] Heat transfer and bubble characteristics in a fluidized bed with immersed horizontal tube bundle
Kim, SW
Ahn, JY
Kim, SD
Lee, DH
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2003, 46 (03) : 399 - 409
[10] LOCAL HEAT-TRANSFER ON A HORIZONTAL TUBE IMMERSED IN FLUIDIZED-BED
SEKI, N
FUKUSAKO, S
TORIKOSHI, K
TANAKA, J
BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1983, 26 (216): : 1109 - 1109

← 1 2 3 4 5 →