Effect of change in stress amplitude on the fatigue damage of Ni-base superalloy at room temperature and 500°C

被引:0
|
作者
Goto, Masahiro [1 ]
Yamamoto, Takaei [1 ]
Kawagoishi, Norio [1 ]
机构
[1] Department of Mechanical Engineering, Oita University, 700 Dan-noharu, Oita-shi, Oita 870-1192, Japan
关键词
Calculations - Crack initiation - Crack propagation - Fatigue of materials - Fatigue testing - Microcracks - Nickel alloys - Oxides - Stresses - Thermal effects;
D O I
暂无
中图分类号
学科分类号
摘要
In order to study the fatigue damage of a Ni-base superalloy Inconel 718 at an elevated temperature, the plain specimens were fatigued at room temperature and 500°C. The crack initiation and crack growth behavior was monitored by the plastic replication method. Experimental results showed that the resistance for slip and crack initiation decreases due to the softening of matrix at elevated temperature. With regard to the crack growth at 500°C, the growth rate of large crack was accelerated, however the growth of microcracks less than 50 μm was suppressed. In addition to the fatigue tests under constant stress amplitudes, the fatigue tests under the two step loading was also performed to clarify the effect of change in stress amplitude on the fatigue damage. There was no effect of the change in stress amplitude on the crack growth behavior at room temperature. For low-to-high block loading at 500°C, the crack growth behavior was hardly affected by the change in stress amplitude. For high-to-low block loading at 500°C, however, the growth behavior of microcracks under a two stress amplitude was influenced by the high stress repetitions. The cumulative cycle ratio Σ(N/Nf) was calculated. The values of Σ(N/Nf) exhibit the distinct tendency determined by the load pattern and temperature. Above results were discussed from the viewpoints of the matrix softening and the oxide films formed at the elevated temperature.
引用
收藏
页码:491 / 498
相关论文
共 50 条
  • [1] ROOM-TEMPERATURE LOW-CYCLE FATIGUE BEHAVIOR OF A NI-BASE SUPERALLOY
    RAMAN, SGS
    PADMANABHAN, KA
    INTERNATIONAL JOURNAL OF FATIGUE, 1994, 16 (03) : 209 - 215
  • [2] Fatigue damage of a thermal barrier coated Ni-base superalloy
    Goswami, B.
    Kumar, B. Ravi
    Tarafder, S.
    Krishna, G.
    Rupa, P. Karuna Purnapu
    Kumar, S. B.
    Ray, A. K.
    HIGH TEMPERATURE MATERIALS AND PROCESSES, 2007, 26 (03) : 209 - 219
  • [3] Fatigue damage of a thermal barrier coated Ni-base superalloy
    National Metallurgical Laboratory , Jamshedpur-831 007, India
    不详
    不详
    High Temp Mater Processes, 2007, 3 (209-219):
  • [4] EFFECT OF STRAIN RATE ON THE CREEP-FATIGUE DAMAGE OF POLYCRYSTALLINE NI-BASE SUPERALLOY AT ELEVATED TEMPERATURE
    Nakayama, Koki
    Miura, Hideo
    PROCEEDINGS OF ASME 2022 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, IMECE2022, VOL 9, 2022,
  • [5] ON THE CYCLIC STRESS-STRAIN BEHAVIOR OF A NI-BASE SUPERALLOY AT ROOM-TEMPERATURE
    SINGH, V
    CHEN, W
    YUN, HM
    WAHI, RP
    SCRIPTA METALLURGICA, 1988, 22 (01): : 77 - 79
  • [6] Fatigue damage behaviour of a coated Ni-base single crystal superalloy
    Gallerneau, F
    Nouailhas, D
    Chaboche, JL
    ECF 11 - MECHANISMS AND MECHANICS OF DAMAGE AND FAILURE, VOLS I-III, 1996, : 1275 - 1280
  • [7] Effect of Radical Nitriding on Fatigue Strength of Ni-base Superalloy
    Morino, K.
    Kawagoishi, N.
    Yamane, K.
    Fukada, K.
    ADVANCES IN FRACTURE AND DAMAGE MECHANICS VIII, 2010, 417-418 : 205 - +
  • [8] Tensile deformation behavior of a new Ni-base superalloy at room temperature
    Zhang, P.
    Yuan, Y.
    Li, B.
    Guo, S. W.
    Yang, G. X.
    Song, X. L.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 655 : 152 - 159
  • [9] Combined Cycle Fatigue of Ni-Base Superalloy
    Kunz, Ludvik
    Lukas, Petr
    Konecna, Radomila
    MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE, 2011, 465 : 523 - +
  • [10] Ultrasonic fatigue properties of Ni-base superalloy
    Chen, Qiang
    Kawagoishi, Norio
    Nisitani, Hironobu
    Otsubo, Ken-Ichi
    Wang, Qingyuan
    Kondo, Eiji
    Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 2003, 69 (03): : 626 - 632