A method for calculating the surrounding rock pressure of shield tunnels in compound strata

被引：0
|
作者：
Xiao M. [1 ,2 ]
Feng K. [2 ]
Li C. [2 ]
Sun W. [1 ]
机构：
[1] China Railway Siyuan Survey and Design Group Co., Ltd., Wuhan, 430063, Hubei
[2] Key Laboratory of Transportation Tunnel Engineering, Ministry of Education, Southwest Jiaotong University, Chengdu, 610031, Sichuan
来源：
Yanshilixue Yu Gongcheng Xuebao/Chinese Journal of Rock Mechanics and Engineering | 2019年 / 38卷 / 09期
基金：
中国国家自然科学基金;
关键词：
Compound strata; In-situ tests; Shield tunnel; Slip-line theory; Surrounding rock pressure calculation; Tunnelling engineering;
D O I：
10.13722/j.cnki.jrme.2019.0045
中图分类号：
学科分类号：
摘要：
The calculation of the surrounding rock pressure of shield tunnels in compound strata is still controversial currently. Aiming at the problems of the calculation of the surrounding rock pressure in compound strata by the classic modified routine method, load calculation models of shield tunnels for two cases of the upper-soft and lower-hard mixed soil ground and the upper-soil and lower-rock mixed ground were proposed, and a formula for calculating the active earth pressure in the lower part of the mixed soil ground was derived based on the slip-line theory. Comparisons were conducted among the results of the proposed method, the modified routine method and in-situ tests against the above two kinds of typical compound strata. The results show that the passive reaction acting on the bottom of tunnels is exaggerated by the modified routine method, which leads to unrealistic surrounding rock pressure, upward deformation and greatly different internal force compared with the measured results at bottom. However, the calculation results of the surrounding rock pressure, tunnel deformationas well as the distribution and the value of the internal force by the proposed method in this paper are in good agreement with the in-situ test results. The proposed method can provide reference for the design and research of shield tunnels in compound strata. © 2019, Science Press. All right reserved.
引用
收藏
页码：1836 / 1847
页数：11
相关论文
共 15 条
  • [1] Zhu W., Ju S., Construction Technology of Shield Tunnel in Mix-Ground, pp. 5-10, (2006)
  • [2] Wang Z., Qiao C., Song C., Calculation method of relaxation pressure of shallow large spantunnel in up-soft/low-hard rock stratum, Rock and Soil Mechanics, 35, 8, pp. 2342-2352, (2014)
  • [3] Lei K., Mo H., Chen J., Et al., Research on mechanical and deformation behaviors of shield tunnel segmentunder the condition of upper-soft and lower-hard composite stratum, Guangdong Architecture Civil Engineering, 23, pp. 52-56, (2016)
  • [4] Zhan G., Chen S., Chen L., Research on mechanical behaviour of shield tunnelsegments in soft-hard uneven strata, Railway Standard Design, 8, pp. 83-86, (2012)
  • [5] He C., Zhang J., Yang Z., Model tests on mechanical characteristics of segment lining structureunder multi-layered strata, Chinese Journal of Geotechnical Engineering, 30, 10, pp. 1537-1543, (2008)
  • [6] Zhang D., Chen L., Compound structural characteristics and load effect of tunnel surrounding rock, Chinese Journal of Rock Mechanics and Engineering, 35, 3, pp. 456-469, (2016)
  • [7] Fu J., Liu Q., Zhao H., Et al., Mechanism and counter measure for floor heave of deep coalmine roadways, Mining and Metallurgical Engineering, 30, 5, pp. 21-26, (2010)
  • [8] Zhang X., Li L., Wang S., Et al., Lim it analysis of surrounding rock pressure forshallow tunnels considering floor heave, Applied Mathematics and Mechanics, 38, 8, pp. 911-921, (2017)
  • [9] Tunnel Standard Specification(shield) and Explanation, pp. 68-73, (2011)
  • [10] He C., Zhang J., Feng K., Research on structural analysis method of shield tunnel, China Journal of Highway and Transport, 30, 8, pp. 1-14, (2017)
12