On the nature of the anisotropy of Maraging steel (1.2709) in additive manufacturing through powder bed laser-based fusion processing

被引：0
|
作者：
Jarfors, Anders E.W. [1 ]
Matsushita, Taishi [1 ]
Siafakas, Dimitrios [1 ]
Stolt, Roland [2 ]
机构：
[1] Jönköping University, School of Engineering, Department of Materials and Manufacturing, Box 1026, Jönköping,55111, Sweden
[2] Jönköping University, School of Engineering, Department of Product Development, Box 1026, Jönköping,55111, Sweden
来源：
Materials and Design | 2021年 / 204卷
关键词：
The current study was part of the Tooladdict project sponsored by the Knowledge Foundation under the KK-HÖG scheme (contract no 20160327 ). The authors are also deeply indebted for the support of the industrial partners in this project Comptech i Skillingaryd AB; Intermekano Tools AB; PLM Group Sverige AB; Uddeholm AB and 3DMetPrint AB. Dr; Nils-Eric Andersson is acknowledged for constructive discussions on all angles related to texture.The current study was part of the Tooladdict project sponsored by the Knowledge Foundation under the KK-HÖG scheme (contract no 20160327). The authors are also deeply indebted for the support of the industrial partners in this project Comptech i Skillingaryd AB; Uddeholm AB and 3DMetPrint AB. Dr. Nils-Eric Andersson is acknowledged for constructive discussions on all angles related to texture;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
引用
收藏
相关论文
共 50 条
  • [1] On the nature of the anisotropy of Maraging steel (1.2709) in additive manufacturing through powder bed laser-based fusion processing
    Jarfors, Anders E. W.
    Matsushita, Taishi
    Siafakas, Dimitrios
    Stolt, Roland
    MATERIALS & DESIGN, 2021, 204
  • [2] Laser Powder Bed Fusion Additive Manufacturing of Maraging Steel: A Review
    Kizhakkinan, Umesh
    Seetharaman, Sankaranarayanan
    Raghavan, Nagarajan
    Rosen, David W.
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2023, 145 (11):
  • [3] Production Tools Made by Additive Manufacturing Through Laser-based Powder Bed Fusion
    Asnafi, Nader
    Rajalampi, Jukka
    Aspenberg, David
    Alveflo, Anton
    BHM Berg- und Huttenmannische Monatshefte, 2020, 165 (03): : 125 - 136
  • [4] Laser-based powder bed fusion additive manufacturing of pure copper
    Jadhav, Suraj Dinkar
    Goossens, Louca Raphael
    Kinds, Yannis
    Van Hooreweder, Brecht
    Vanmeensel, Kim
    ADDITIVE MANUFACTURING, 2021, 42
  • [5] Infrared Thermography for Laser-Based Powder Bed Fusion Additive Manufacturing Processes
    Moylan, Shawn
    Whitenton, Eric
    Lane, Brandon
    Slotwinski, John
    40TH ANNUAL REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION: INCORPORATING THE 10TH INTERNATIONAL CONFERENCE ON BARKHAUSEN NOISE AND MICROMAGNETIC TESTING, VOLS 33A & 33B, 2014, 1581 : 1191 - 1196
  • [6] Effect of Energy Density on the Mechanical Properties of 1.2709 Maraging Steel Produced by Laser Powder Bed Fusion
    Hatos, Istvan
    Hargitai, Hajnalka
    Fekete, Gusztav
    Fekete, Imre
    MATERIALS, 2024, 17 (14)
  • [7] Manufacturability analysis of metal laser-based powder bed fusion additive manufacturing—a survey
    Ying Zhang
    Sheng Yang
    Yaoyao Fiona Zhao
    The International Journal of Advanced Manufacturing Technology, 2020, 110 : 57 - 78
  • [8] Improved Process Efficiency in Laser-Based Powder Bed Fusion of Nanoparticle Coated Maraging Tool Steel Powder
    Pannitz, Oliver
    Grosswendt, Felix
    Luddecke, Arne
    Kwade, Arno
    Roettger, Arne
    Sehrt, Jan Torsten
    MATERIALS, 2021, 14 (13)
  • [9] Additive manufacturing of maraging steel-H13 bimetals using laser powder bed fusion technique
    Shakerin, Sajad
    Hadadzadeh, Amir
    Amirkhiz, Babak Shalchi
    Shamsdini, Seyedamirreza
    Li, Jian
    Mohammadi, Mohsen
    ADDITIVE MANUFACTURING, 2019, 29
  • [10] Design and characterization of a cobalt-free stainless maraging steel for laser-based powder bed fusion
    Riabov, D.
    Frisk, K.
    Thuvander, M.
    Hryha, E.
    Bengtsson, S.
    MATERIALS & DESIGN, 2022, 223
12345