Form error compensation in single-point inclined axis nanogrinding for small aspheric insert

被引：0
|
作者：
机构：
[1] Chen, Fengjun
[2] Yin, Shaohui
[3] Ohmori, Hitoshi
[4] Yu, Jianwu
来源：
Yin, S. (shyin2000@hotmail.com) | 1600年 / Springer London卷 / 65期
关键词：
Based on an examination of traditional arc-enveloped grinding method; a single-point inclined axis nanogrinding method is presented to grind an aspheric insert by compensating tool setting error; radius error; and residual form error. Profile data from on-machine measurement are used to obtain the tool setting error and radius error of grinding wheel; as well as the normal residual form error. Compensation method of single-point inclined axis nanogrinding is built up for generating new compensation path. Grinding test of aspheric tungsten carbide insert with diameter 9.5 mm is conducted to evaluate performances of the grinding mode and compensation method. A last form error of 200 nm in peak to valley and surface roughness of 2.243 nm in Ra are achieved. These results indicated that the form error compensation method and single-point inclined axis nanogrinding mode can significantly improve form accuracy and surface roughness of ground surface. © 2012 Springer-Verlag London Limited;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：1 / 4
相关论文
共 50 条
  • [1] Form error compensation in single-point inclined axis nanogrinding for small aspheric insert
    Chen, Fengjun
    Yin, Shaohui
    Ohmori, Hitoshi
    Yu, Jianwu
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013, 65 (1-4): : 433 - 441
  • [2] Form error compensation in single-point inclined axis nanogrinding for small aspheric insert
    Fengjun Chen
    Shaohui Yin
    Hitoshi Ohmori
    Jianwu Yu
    The International Journal of Advanced Manufacturing Technology, 2013, 65 : 433 - 441
  • [3] Single-point inclined-axis error compensation grinding for small aspheric optical molds
    Chen, F. (abccfj@126.com), 2013, Chinese Mechanical Engineering Society (49):
  • [4] Error Compensation in One-point Inclined-axis Nanogrinding Mode for Small Aspheric Mould
    Yin, Shaohui
    Chen, Fengjun
    Wang, Yu
    Fan, Yufeng
    Zhu, Yongjian
    Ohmori, Hitoshi
    Katahira, Kazutoshi
    MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-5, 2010, 97-101 : 4206 - +
  • [5] Fabrication of small aspheric moulds using single point inclined axis grinding
    Chen, Fengjun
    Yin, Shaohui
    Huang, Han
    Ohmori, Hitoshi
    PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2015, 39 : 107 - 115
  • [6] Ultra-precision single-point grinding technique and profile error compensation method for machining aspheric mould
    Chen F.
    Yin S.
    Fan Y.
    Zhu Y.
    Liu Q.
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2010, 46 (23): : 186 - 191
  • [7] A study on the form error compensation for aspheric lens machining
    Tso, PL
    Chuang, HC
    ADVANCES IN ABRASIVE TECHNOLOGY V, 2003, 238-2 : 369 - 374
  • [8] Ultraprecision grinding of small-aperture concave aspheric mould insert with tilt axis method
    Yan, Guangpeng
    You, Kaiyuan
    Fang, Fengzhou
    4TH CIRP CONFERENCE ON SURFACE INTEGRITY (CSI 2018), 2018, 71 : 505 - 510
  • [9] Profile Compensation for Single-Point Diamond Turning of Microlens Array
    Wang, Zhiyue
    Chen, Zaozao
    Zhang, Xinquan
    NANOMANUFACTURING AND METROLOGY, 2022, 5 (04) : 403 - 411
  • [10] Hysteresis compensation for piezoelectric actuators in single-point diamond turning
    Wang, HF
    Hu, DJ
    Wan, DP
    Liu, HB
    2ND INTERNATIONAL CONFERENCE ON ADVANCED OPTICAL MANUFACTURING AND TESTING TECHNOLOGIES: ADVANCED OPTICAL MANUFACTURING TECHNOLOGIES, 2006, 6149
12345