Mechanical properties of Al-2.5 Mg-0.1 Mn-Si-Cr-Fe alloys

被引：0
|
作者：
Shuaib, A.N. [1 ]
机构：
[1] Mechanical Engineering Department, King Fahd Univ. of Petroleum/Mnrl., Dhahran 31261, Saudi Arabia
来源：
Materials and Design | 2002年 / 23卷 / 02期
关键词：
Composition - Corrosion resistant alloys - Elastic moduli - Formability - Strain - Strain hardening - Tensile strength;
D O I：
10.1016/s0261-3069(01)00067-x
中图分类号：
学科分类号：
摘要：
This paper reports the results of a study to evaluate the effect of composition and temper on the mechanical properties and formability of corrosion-resistant modified Al-2.5 Mg alloys. The modified alloys contain iron, silicon, manganese and chromium, in addition to magnesium. The effects of composition and temper were evaluated using the elastic modulus, ultimate tensile strength and strain, percent elongation, and the strain-hardening coefficients of the modified alloys obtained from tension test experiments. The mechanical properties and formability of the investigated alloys were affected to various degrees by both composition and temper. © 2002 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码：181 / 187
相关论文
共 50 条
  • [1] Mechanical properties of Al-2.5 Mg-0.1 Mn-Si-Cr-Fe alloys
    Shuaib, AN
    MATERIALS & DESIGN, 2002, 23 (02): : 181 - 187
  • [2] Effect of Mn and Cr on structure and mechanical properties of Al-10%Mg-0.1%Ti alloy
    Razazi, Hossein Alizadeh
    Paidar, Moslem
    Ojo, Olatunji Oladimeji
    VACUUM, 2018, 155 : 619 - 630
  • [3] Effect of Si on the structure and mechanical properties of Al-10%Mg-0.1%Ti alloy
    Rasouli, M.
    Moghanian, A.
    Sadreddini, S.
    Ojo, O.
    MATERIALS RESEARCH EXPRESS, 2019, 6 (07)
  • [4] Effects of casting conditions on microstructure and mechanical properties of Al-7%Si-0.3%Mg-0.1%Sb casting alloys
    Adachi, Mitsuru
    Oishi, Akira
    Moribe, Atsushi
    Tanaka, Ryoji
    Keikinzoku/Journal of Japan Institute of Light Metals, 1988, 38 (08): : 479 - 484
  • [5] Effect of Cr Addition on Microstructure and Mechanical Properties at Elevated Temperature of Al-Mn-Mg-Si Alloys
    Li, Zhen
    Qin, Jian
    Zhang, Bo
    Nagaumi, Hiromi
    MATERIALS TRANSACTIONS, 2020, 61 (11) : 2095 - 2100
  • [6] Microstructural evolution during recovery in Al-2.5%Mg alloys
    Verdier, M
    Janecek, M
    Brechet, Y
    Guyot, P
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 248 (1-2): : 187 - 197
  • [7] Microstructure and mechanical properties of spray-deposited Al-Si-Fe-Mn-Cu-Mg alloys
    Wang, Feng
    He, Jian-Ping
    Yang, Bin
    Cui, Hua
    Duan, Xian-Jin
    Xiong, Bai-Qing
    Zhang, Ji-Shan
    Hangkong Cailiao Xuebao/Journal of Aeronautical Materials, 2001, 21 (01):
  • [8] Effect of Mn/Cr ratio on precipitation behaviors of α-Al(FeMnCr)Si dispersoids and mechanical properties of Al-Mg-Si-Cu alloys
    Liu, Fangzhen
    Zhu, Xiaohua
    Qin, Jian
    Zhou, Wei
    Ling, Jianquan
    Dong, Qipeng
    Yu, Jiamin
    Nagaumi, Hiromi
    Zhang, Bo
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 860
  • [9] Development of Innovative Al-Si-Mn-Mg Alloys with High Mechanical Properties
    Medved, Jozef
    Kores, Stanislav
    Voncina, Maja
    LIGHT METALS 2018, 2018, : 373 - 380
  • [10] STRUCTURE AND MECHANICAL-PROPERTIES OF RAPIDLY SOLIDIFIED AL-(FE,CR) AND AL-MG-(FE,CR) ALLOYS
    ABRAMOV, VO
    SOMMER, F
    MATERIALS LETTERS, 1994, 20 (5-6) : 251 - 255
12345