Integrated Prediction Method of Plastic Parameters and Hardness of Materials Based on VICKERS Indentation Theory Model

被引：1
|
作者：
Chen H. [1 ,2 ]
Fu Z. [2 ]
Chen D. [2 ]
Meng Z. [2 ]
Fan Z. [2 ]
机构：
[1] Key Laboratory of Bridge Engineering Safety Control, Ministry of Education, Changsha University of Science & Technology, Changsha
[2] School of Civil Engineering, Changsha University of Science & Technology, Changsha
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2023年 / 59卷 / 08期
关键词：
energy equivalence method; HOLLOMON model; instrumented indentation; VICKERS hardness;
D O I：
10.3901/JME.2023.08.132
中图分类号：
学科分类号：
摘要：
Compared with Brinell and Rockwell hardness, VICKERS hardness has the advantages of wide measurement range and shallow indentation depth. For metallic materials with homogeneous, continuous, isotropic and power-law hardening characteristics, an elastic-plastic model describing the relationship between VICKERS-indentation load and depth is established by using the energy equivalent method. Combined with the hardness definition equation, the explicit theoretical relationship between the parameters of the material tensile properties and VICKERS hardness is obtained. A new method for integrated VICKERS hardness and tensile properties parameters through the instrumented indentation load depth curve is proposed. Within the range of HOLLOMON model parameters corresponding to the tensile properties of actual materials including steel, copper and aluminum, extensive forward and reverse prediction verification is carried out by using finite element analysis. In addition, the VICKERS hardness test data of nine ductile metal materials in the existing reference are used for integrated prediction and analysis. The results show that the VICKERS hardness and parameters of HOLLOMON model predicted by this method are in good agreement with the results of conventional standard tests. © 2023 Editorial Office of Chinese Journal of Mechanical Engineering. All rights reserved.
引用
收藏
页码：132 / 141
页数：9
相关论文
共 27 条
  • [1] DUGDALE D S., Vickers hardness and compressive strength[J], Journal of the Mechanics and Physics of Solids, 6, 2, pp. 85-91, (1958)
  • [2] MULHEARN T O., The deformation of metals by VICKERS type pyramidal indenters[J], Journal of the Mechanics and Physics of Solids, 7, 2, pp. 85-88, (1959)
  • [3] MA Dejun, Principle of Instrumented indentation test for mechanical properties of materials, (2010)
  • [4] STILWELL N A, TABOR D., Elastic recovery of conical indentations[J], Proceedings of the Physical Society, 78, 2, pp. 169-179, (1961)
  • [5] BULYCHEV S I, ALEKHIN V P，, SHORSHOROV M H, Et al., Determining Young’s modulus from the indentor penetration diagram[J], Ind. Lab, 41, 9, pp. 1409-1412, (1975)
  • [6] PETHICA J B., Microhardness tests with penetrationdepths less than ion implanted layer thickness, (1982)
  • [7] OLIVER W C, PHARR G M., An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments[J], Journal of Materials Research, 7, 6, pp. 1564-1583, (1992)
  • [8] DOERNER M, NIX W., A method for interpreting thedata from depth-sensing indentation instruments[J], Journal of Materials Research, 1, 4, pp. 601-609, (1986)
  • [9] RIBEIRO F A, GIUSEPPE P，, Amilton S，, Et al., The use of a VICKERS indenter in depth sensing indentationfor measuring elastic modulus and VICKERS hardness[J], Materials Research, 7, 3, pp. 483-491, (2004)
  • [10] GIANNAKOPOULOS A E, LARSSON P L, VESTERGAARD R., Analysis of VICKERS indentation[J], International Journal of Solids & Structures, 31, 19, pp. 2679-2708, (2015)
123