Preparation of 3D printed weft plain knitted fabric

被引：0
|
作者：
Cheng Y. [1 ,2 ]
Meng J. [1 ,2 ]
Xue T. [1 ,2 ]
Zhi C. [1 ,2 ]
机构：
[1] School of Textile Science and Engineering, Xi'an Polytechnic University, Shaanxi, Xi'an
[2] Key Laboratory of Functional Textile Material and Product, Ministry of Education, Xi'an Polytechnic University, Shaanxi, Xi'an
来源：
Fangzhi Xuebao/Journal of Textile Research | 2022年 / 43卷 / 09期
关键词：
3D printed fabric; fused deposition modeling technology; polylactic acid material; three-dimensional simulation; weft plain knitted structure;
D O I：
10.13475/j.fzxb.20210400305
中图分类号：
学科分类号：
摘要：
In order to study the structure of weft plain knitted clothing fabrics produced by 3D printed, predict its printing effect and improve the digital and intelligent production of knitting fabrics, 3D printing technology was applied to the design and production of knitting fabrics. 3ds Max software was used to model the weft plain knitted fabric based on the NURBS curve modeling method and the Peirce loop model. The visualization of 3D printed weft plain knitted fabric was achieved and the printing effect was able to be predicted through simulation. Repetier-Host software was used to slice the simulated 3D printed weft plain knitted fabric model. The printing parameters were set and the model slice data was printed by fused deposition modeling technology, the 3D printed weft plain knitted fabrics were obtained. The results show that the effect of the printed fabrics is highly consistent with the simulated effects, and the intermeshing relationship between the loops is obvious. The printed fabrics are smooth and flat and the printing accuracy is high. The printed fabrics are environmental friendly fabrics. © 2022 China Textile Engineering Society. All rights reserved.
引用
收藏
页码：115 / 119
页数：4
相关论文
共 11 条
  • [1] DING Xiaoyao, FAN Lixia, LU Xingyu, Parameter analysis in extrusion rate of energetic material 3D printer's nozzle flow, Machinery Design and Manufacture, 6, pp. 74-77, (2018)
  • [2] RETOLAZA J, ANSOLA R, GOMEZ J L, Et al., Identifying elastic constants for PPS technical material when designing and printing parts using FDM technology [J], Materials, (2021)
  • [3] THAN Y M, TITAPIWATANAKUN V., Tailoring immediate release FDM 3D printed tablets using a quality by design (QbD) approach [J], International Journal of Pharmaceutics, (2021)
  • [4] TOSTO C, SAITTA L, PERGOLIZZI E, Et al., Fused deposition modelling (FDM) : new standards for mechanical characterization, Macromolecular Symposia, (2021)
  • [5] WANG Yanlan, REN Chong, ZHANG Wei, Et al., Research on precision of FDM carbon fiber reinforced ABS parts by response surface method [J], Modern Manufacturing Engineering, 2, pp. 16-20, (2021)
  • [6] WEN Zhou, XUE Meigui, WANG Xuhong, Optimization of PLA product process by melt deposition based on taguchi test, Engineering Plastics Application, 49, 1, pp. 58-62, (2021)
  • [7] SUN Haocheng, CUI Yulei, WANG Yidi, Et al., Research progress on physical modification of bio-based degradable plastics, Modern Plastics Processing and Applications, 33, 1, pp. 56-59, (2021)
  • [8] VIDOTTO M, MIHALJEVIC B, ZAUHAR G, Et al., Effects of -y-radiation on structure and properties of poly (lactic acid) filaments, Radiation Physics and Chemistry, (2021)
  • [9] PERRY Anna, 3D-printed apparel and 3D-printer: exploring advantages, concerns, and purchases, International Journal of Fashion Design: Technology and Education, 11, 1, pp. 95-103, (2018)
  • [10] GAWE A, KUCIEL S., The study of physico-mechanical properties of polylactide composites with different level of infill produced by the FDM method, Polymers, (2020)
12