Assessment of heterogeneity of welded joint of two different metals by modeling of diffusion of substitution elements

被引：0
|
作者：
Faculty of Metallurgy and Materials Engineering, VŠB-Technical University Ostrava, 17. listopadu 15, Ostrava [1 ]
708 33, Czech Republic
不详 [2 ]
708 33, Czech Republic
不详 [3 ]
616 69, Czech Republic
机构：
来源：
Solid State Phenomena | 2008年 / 193-200期
关键词：
Welding - Molybdenum alloys - Vanadium alloys - Silicon alloys - Welds - Chromium alloys;
D O I：
10.4028/www.scientific.net/SSP.138.193
中图分类号：
学科分类号：
摘要：
The paper presents original methodology for assessment of heterogeneity of welded joint by measurement of concentration profiles of substitution elements in three straight lines in a plane perpendicular to the weld interface. The weld joint is formed by low-alloyed CrNiMoV steel and low-alloy silicon steel. Three concentration profiles are evaluated by modeling of diffusion based on solution of the 2nd Fick’s law. Primary goal of evaluation consists in assessment of chemical heterogeneity in the narrow area on both sides of the weld joint on the basis of their mutual position. Experimental data are optimized by original adaptation of the Levenberg–Marquardt’s algorithm of non-linear regression. Modeling comprises also determination of diffusivities and graphical representation of their temperature dependencies. The paper deals with diffusion of silicon as an example of many other investigated elements. © (2008) Trans Tech Publications, Switzerland.
引用
收藏
页码：193 / 200
相关论文
共 29 条
  • [1] Assessment of heterogeneity of welded joint of two different metals by modeling of diffusion of substitution elements
    Rehackova, L.
    Kalousek, J.
    Dobrovská, J.
    Dostál, Z.
    Stránský, K.
    [J]. Solid State Phenomena, 2008, 138 : 193 - 200
  • [2] On mathematical modelling of substitution elements diffusion in the neighbourhood of welded joint of steels
    Rehackova, Lenka
    Kalousek, Jaroslav
    Dobrovska, Jana
    Stransky, Karel
    [J]. MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE V, 2008, 567-568 : 305 - +
  • [3] On Heterogeneity of Welded Joint by Modelling of Diffusion
    Rehackova, L.
    Kalousek, J.
    Dobrovska, J.
    [J]. DAMAGE AND FRACTURE MECHANICS, 2009, : 307 - 314
  • [4] CHARACTERIZATION OF CHEMICAL HETEROGENEITY OF THE WELDED JOINT OF TWO STEELS BY MODELLING OF DIFFUSION PROCESSES
    Rehackova, L.
    Dobrovska, J.
    Kalousek, J.
    [J]. METALURGIJA, 2013, 52 (03): : 355 - 358
  • [5] Joint quality assessment of three different laser welded dental alloys
    Ardelean, Lavinia
    Reclaru, Lucien
    Bortun, Cristina
    Rusu, Laura-Cristina
    [J]. ADVANCED MATERIALS AND STRUCTURES V, 2014, 216 : 63 - 66
  • [6] DISTRIBUTION OF ELEMENTS IN THE JOINT ZONE DURING THE DIFFUSION WELDING OF METALS TO CERAMICS AND GLASS
    BACHIN, VA
    KAZAKOV, NF
    [J]. AUTOMATIC WELDING USSR, 1985, 38 (09): : 38 - 40
  • [7] On mathematical modelling of the diffusion characteristics in the close vicinity of two steels welded joint
    Rehackova, Lenka
    Kalousek, Jaroslav
    Dobrovska, Jana
    [J]. MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE, 2011, 465 : 133 - 136
  • [8] HETEROGENEITY OF TEXTURE IN THE ZONE OF A DIFFUSION-WELDED JOINT IN VT6 TITANIUM-ALLOY
    KARAKOZOV, ES
    PERLOVICH, YA
    ISAENKOVA, MG
    [J]. AUTOMATIC WELDING USSR, 1981, 34 (02): : 19 - 20
  • [9] Influence of Different Interlayers Metals on Properties of Diffusion Bonding Joint of Tungsten to Copper
    Li, Jun
    Fang, Xu
    Yang, Jian Feng
    Qiao, Guan-Jun
    [J]. ECO-MATERIALS PROCESSING AND DESIGN X, 2009, 620-622 : 65 - 68
  • [10] Effect of material heterogeneity and constraint conditions on ductile fracture resistance of welded joint zones - Micromechanical assessment
    Younise, B.
    Rakin, M.
    Gubeljak, N.
    Medjo, B.
    Sedmak, A.
    [J]. ENGINEERING FAILURE ANALYSIS, 2017, 82 : 435 - 445
123