Use of small punch test to estimate the mechanical properties of sintered products and application to synchronizer hubs

被引：11

作者：

Fernández M. ^{[1
]}

Rodríguez C. ^{[2
]}

Belzunce F.J. ^{[2
]}

García T.E. ^{[2
]}

机构：

[1] PMG Füssen GmbH, Hiebelerstr. 4, Füssen

[2] SIMUMECAMAT, University of Oviedo, Edificio Departamental Oeste 7.1.17, Campus Universitario, Gijón

来源：

Met Powder Rep | / 5卷 / 355-360期

关键词：

D O I：

10.1016/j.mprp.2016.02.056

中图分类号：

学科分类号：

摘要：

Powder metallurgy is a manufacturing technology widely used, especially in the automotive sector. In order to assure the quality of these components different conventional tests are employed directly on the final product, but in order to make the mechanical characterization of sintered materials, standard mechanical tests can only be performed onto samples compacted and sintered in controlled conditions similar to the ones used in real production. The final mechanical properties of these products after compacting and sintering are the input needed to define and analyze new geometries and products. The use of the small punch test (SPT) to mechanically characterize in a direct way the final sintered products was explained in this research work and the regressions to determine the tensile mechanical properties of the aforementioned products were also developed. © 2016 Elsevier Ltd

引用

页码：355 / 360

页数：5

共 50 条

[1] Use of small punch test to estimate the mechanical properties of powder metallurgy products employed in the automotive industry
Fernandez, M.
Rodriguez, C.
Belzunce, F. J.
Garcia, T. E.
POWDER METALLURGY, 2015, 58 (03) : 171 - 177
[2] The use of a small punch test procedure to determine mechanical properties
Lee, WK
Metzger, DR
Donner, A
Lepik, OE
SMALL SPECIMEN TEST TECHNIQUES, 1998, 1329 : 539 - 556
[3] Application of Modified Small Punch Test in Evaluation of Mechanical Properties for Ceramics
Yan P.
Fan Y.
Wang L.
Jiang W.
Kuei Suan Jen Hsueh Pao/Journal of the Chinese Ceramic Society, 2019, 47 (08): : 1065 - 1072
[4] Application of Sintered Steel for Synchronizer Rings used in Mechanical Transmissions
Andrade, T. F.
Zambon, A. C.
Sena, C. H. C.
Bida, A. G.
Kavai, J. R.
ADVANCED POWDER TECHNOLOGY VIII, PTS 1 AND 2, 2012, 727-728 : 349 - +
[5] EVALUATION OF MECHANICAL PROPERTIES OF THE REACTOR PRESSURE VESSEL MATERIALS CHANGES BY SMALL PUNCH TEST APPLICATION
Petzova, Jana
Brezina, Martin
Kupca, L'udovit
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2013, VOL 1A: CODES AND STANDARDS, 2014,
[6] Application of Small Punch Techniques for the Determination of Gold Mechanical Properties
Cicero, S.
Lacalle, R.
Gutierrez-Solana, F.
STRAIN, 2011, 47 : E484 - E492
[7] The Application of the Small Punch Test to the Mechanical Characterization of Different Steel Grades
Rodriguez, C.
Garcia, T. E.
Belzunce, F. J.
Penuelas, I.
DETERMINATION OF MECHANICAL PROPERTIES OF MATERIALS BY SMALL PUNCH AND OTHER MINIATURE TESTING TECHNIQUES, 2ND INTERNATIONAL CONFERENCE SSTT, 2012, : 188 - 195
[8] Application of the miniature small punch test for the mechanical characterization of polymer materials
Rodriguez, C.
Cuesta, I. I.
Maspoch, M. Ll.
Belzunce, F. J.
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2016, 86 : 78 - 83
[9] Estimation of the mechanical properties of metallic materials by means of the small punch test
Garcia, T. E.
Rodriguez, C.
Belzunce, F. J.
Suarez, C.
JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 582 : 708 - 717
[10] SMALL PUNCH TEST ON MECHANICAL PROPERTIES OF MOLYBDENUM SINGLE CRYSTAL WELD
Ma, Yan
Wang, Jianju
Lei, Jinyun
PROCEEDINGS OF THE 25TH INTERNATIONAL CONFERENCE ON NUCLEAR ENGINEERING, 2017, VOL 3, 2017,

← 1 2 3 4 5 →