Removal characteristics of Cd(II) from acidic aqueous solution by modified steel-making slag

被引：0
|
作者：
机构：
[1] [1,Duan, Jinming
[2] Su, Bing
来源：
Duan, J. (duanjinming@jmu.edu.cn) | 1600年 / Elsevier B.V., Netherlands卷 / 246期
关键词：
In this work; the original and modified steel-making slags were tested to remove of Cd(II) ions from acidic aqueous solution. The physicochemical characteristics of the materials were investigated to understand the effect of surface properties on the Cd(II) adsorption behavior. The effects of contact time; pH; adsorbent dosage and temperature on adsorption process were studied in batch experiments. The results showed that the adsorption capacity of modified steel-making slag was found to sharply increase as a result of modification; and the adsorbent has excellent acid neutralization capacity. The optimum condition for removal was found to be 10. g/L adsorbent on the treatment of 100. mg/L Cd(II) at pH 4.0; and the Cd(II) removal rate could reach 99.1%. Kinetic data were best described by pseudo-second-order model. The adsorption isotherms were good fit to the Langmuir model with a maximum adsorption capacity of 10.16. mg/g at 25. °C. The thermodynamic studies indicated that the adsorption was a spontaneous and endothermic process. It was concluded that the mechanism of Cd(II) removal by modified steel-making slag is mainly based on chemisorptions including chemical precipitation and coordination reactions. © 2014 Elsevier B.V;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
下载
收藏
相关论文
共 50 条
  • [1] Removal characteristics of Cd(II) from acidic aqueous solution by modified steel-making slag
    Duan, Jinming
    Su, Bing
    CHEMICAL ENGINEERING JOURNAL, 2014, 246 : 160 - 167
  • [2] Removal characteristics of As(III) and As(V) from acidic aqueous solution by steel making slag
    Oh, Chamteut
    Rhee, Sungsu
    Oh, Myounghak
    Park, Junboum
    JOURNAL OF HAZARDOUS MATERIALS, 2012, 213 : 147 - 155
  • [3] Characteristics of Nitrate Removal from Aqueous Solution by Modified Steel Slag
    Yang, Liyun
    Yang, Maomao
    Xu, Ping
    Zhao, Xiancong
    Bai, Hao
    Li, Hong
    WATER, 2017, 9 (10):
  • [4] ADSORPTION OF HEXAVALENT CHROMIUM FROM AN AQUEOUS SOLUTION OF STEEL-MAKING SLAG
    Strkalj, Anita
    Glavas, Zoran
    Matijasic, Gordana
    MATERIALI IN TEHNOLOGIJE, 2014, 48 (05): : 619 - 622
  • [5] Steel-Making dust as a potential adsorbent for the removal of lead (II) from an aqueous solution
    Bouabidi, Zineb B.
    El-Naas, Muftah H.
    Cortes, Dan
    McKay, Gordon
    CHEMICAL ENGINEERING JOURNAL, 2018, 334 : 837 - 844
  • [6] Utilization of steel-making slag for the uptake of ammonium and phosphate ions from aqueous solution
    Jha, Vinay Kumar
    Kameshima, Yoshikazu
    Nakajima, Akira
    Okada, Kiyoshi
    JOURNAL OF HAZARDOUS MATERIALS, 2008, 156 (1-3) : 156 - 162
  • [7] Efficient Removal of Arsenic (V) from Water Using Steel-Making Slag
    Chakraborty, A.
    Sengupta, A.
    Bhadu, M. K.
    Pandey, A.
    Mondal, A.
    WATER ENVIRONMENT RESEARCH, 2014, 86 (06) : 524 - 531
  • [8] Phosphorus removal from aqueous solution by steel making slag - Mechanisms and performance optimisation
    Vu, Minh T.
    Nguyen, Luong N.
    Johir, Md Abu Hasan
    Ngo, Hao H.
    Skidmore, Catherine
    Fontana, Andrea
    Galway, Brendan
    Bustamante, Heriberto
    Nghiem, Long D.
    JOURNAL OF CLEANER PRODUCTION, 2021, 284
  • [9] The stability of the compounds formed in the process of removal Pb(II), Cu (II) and Cd(II) by steelmaking slag in an acidic aqueous solution
    Yang, Liyun
    Wen, Tingting
    Wang, Liping
    Miki, Takahiro
    Bai, Hao
    Lu, Xin
    Yu, Huafang
    Nagasaka, Tetsuya
    JOURNAL OF ENVIRONMENTAL MANAGEMENT, 2019, 231 : 41 - 48
  • [10] Removal mechanisms of copper using steel-making slag: adsorption and precipitation
    Kim, Do-Hyung
    Shin, Min-Chul
    Choi, Hyun-Doc
    Seo, Chang-Il
    Baek, Kitae
    DESALINATION, 2008, 223 (1-3) : 283 - 289
12345