Research on Integrated Control Strategy for Shifting Process of Automatic Transmission

被引:0
|
作者
Lei Y.-L. [1 ]
Hu J.-L. [1 ]
Zheng X.-S. [1 ]
Li X.-Z. [1 ]
Fu Y. [1 ]
机构
[1] State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun, 130000, Jilin
关键词
Automotive transmission; Optimal control; Power on shift; Simulation test and real vehicle validation;
D O I
10.15918/j.tbit1001-0645.2018.1.035
中图分类号
学科分类号
摘要
In this paper, analyzing the dynamics principle of power shift process of automotive transmission (AT), a simulation platform was established for power transmission system with software MATLAB and LMS.Amesim. A phased control strategy was proposed for the power shift process, including torque phase and inertial phase. In the torque phase, the constant slope of friction torque was taken as the control objective, and the inertial phase was arranged for optimal tracking control. Considering the performance index function of the shift jerk and the clutch sliding work, the optimal control law was established based on the minimum principle, the shift time was optimized and the calculation process of the shift time was presented. The effectiveness of the control strategy was verified by simulation and real vehicle tests. The results show the control strategy can improve the comprehensive performance of vehicle shifting. © 2018, Materials Review Magazine. All right reserved.
引用
收藏
页码:161 / 165
页数:4
相关论文
共 4 条
  • [1] Zhang P., Study on transmission efficiency and vehicle fuel economy of hydro mechanical automatic transmission, (2017)
  • [2] Yang C., Dynamic modeling and integrated control of shifting process of hydraulic automatic transmission, (2014)
  • [3] Wang E., Chen H., Gu H., Et al., Control strategy for shifting process of heavy planetary automatic transmission, Transactions of Beijing Institute of Technology, 37, 5, pp. 485-490, (2017)
  • [4] Wang E., Tao G., Wang G., Et al., Research on shift process of AT based on quality evaluation analysis, Transactions of Beijing Institute of Technology, 36, 7, pp. 690-694, (2016)