The effects of inverter-fed on radial carrying capacity of three-pole radial-axial hybrid magnetic bearings

被引：0
|
作者：
Ju J. [1 ]
Zhu H. [1 ]
Zhang W. [1 ]
机构：
[1] School of Electrical and Information Engineering, Jiangsu University, Zhenjiang, 212013, Jiangsu Province
来源：
Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering | 2016年 / 36卷 / 11期
关键词：
Carrying capacity; Inverter driving; Magnetic bearings; Radial-axial; Three-pole;
D O I：
10.13334/j.0258-8013.pcsee.2016.11.026
中图分类号：
学科分类号：
摘要：
The three-pole radial-axial hybrid magnetic bearing is driven by three-phase inverter in the radial direction, because the three-phase inverter has the advantages of small volume, low power lost and low costs. However, the sum of three-phase currents of the inverter must be zero, which has effects on the radial carrying capacity of the magnetic bearings. The structure and work principle of three-pole radial-axial hybrid magnetic bearings were first introduced and the mathematic model of fluxes in air gaps was built. According to the model, the conditions of producing maximum suspension forces in positive and negative directions of rectangular coordinate axes were analyzed and the equations of maximum suspension force are derived. To proving the correctness of the analysis, finite element simulations were calculated by software ANSOFT and the experiment data were measured. The simulation and experiment results agree with the analytical results. The works of this paper are instructive and meaningful to the design, installation and control of three-pole magnetic bearings. © 2016 Chin. Soc. for Elec. Eng.
引用
收藏
页码：3085 / 3091
页数：6
相关论文
共 20 条
  • [1] Zhang W., Zhu H., Improved model and experiment for AC-DC three-degree-of-freedom hybrid magnetic bearing, IEEE Transactions on Magnetics, 49, 11, pp. 5554-5565, (2013)
  • [2] Ji S., Zhang W., Huang Z., Et al., Parameter design and optimization of AC active magnetic bearing, Proceedings of the CSEE, 31, 21, pp. 150-157, (2011)
  • [3] Zhao X., Deng Z., Wang X., Et al., Research status and development of permanent magnet biased magnetic bearings, Transactions of China Electrotechnical Society, 24, 9, pp. 9-20, (2009)
  • [4] Zhong J., Li L., Fractional-order system identification of a solid-core active magnetic bearing, Proceedings of the CSEE, 33, 18, pp. 170-178, (2013)
  • [5] Wang J., Xu L., Equivalent mathematical models of switching power amplifier for magnetic bearing, Transactions of China Electrotechnical Society, 25, 4, pp. 53-58, (2010)
  • [6] Zhou D., Zhu C., Li P., Et al., Switch point self-turning method of combined flux observers in active magnetic bearings, Proceedings of the CSEE, 33, 30, pp. 121-128, (2013)
  • [7] Gao L., Xu Z., Zhu K., Et al., Modeling and decoupling control of conical magnetic bearings, Proceedings of the CSEE, 33, 6, pp. 153-161, (2013)
  • [8] Fang J., Sun J., Liu H., Et al., A novel 3-DOF axial hybrid magnetic bearing, IEEE Transactions on magnetics, 46, 12, pp. 4034-4045, (2010)
  • [9] Hou E., Liu K., Investigation of axial carrying capacity of radial hybrid magnetic bearing, IEEE Transactions on magnetics, 48, 1, pp. 38-46, (2012)
  • [10] Impinna F., Detoni J.G., Amati N., Et al., Passive magnetic levitation of rotors on axial electrodynamic bearings, IEEE Transactions on Magnetics, 49, 1, pp. 599-608, (2013)
12