Sealing Performance and Sensitivity Analysis of Structure Parameters for a New Beam Seal

被引：0
|
作者：
Cui Y. [1 ]
Yu Y. [1 ]
Wang Y. [1 ]
Zhao S. [2 ]
Zhong J. [3 ]
机构：
[1] College of Naval Architecture and Ocean Engineering, Dalian Maritime University, Dalian
[2] Shenyang Engine Design Institute, Aero Engine Corporation of China, Shenyang
[3] College of Merchant Marine, Shanghai Maritime University, Shanghai
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2021年 / 57卷 / 03期
关键词：
Beam seal; Elastic-plastic finite element; Orthogonal array method; Sealing performance; Sensitivity;
D O I：
10.3901/JME.2021.03.147
中图分类号：
学科分类号：
摘要：
The beam seal has a broad application prospect in the aviation hydraulic system due to its high-pressure resistance, self-tightening and self-sealing features. A type of female joint structure with elliptical groove is proposed. The elastic-plastic finite element contact model of the beam seal is established. The analysis with the maximum contact pressure as the evaluation index of sealing performance shows that the fluid pressure in the pipe can improve the sealing performance of the beam seal, and there is an optimal design value for the applied pre-tightening force. The experimental results of the contact bandwidth on the mating surfaces of the female and male joints under different pre-tightening force are in good agreement with the numerical simulation, which verifies the effectiveness of the finite element model and analysis method. Furthermore, the main structural parameters of the beam seal are analyzed by orthogonal array method, and the sensitivity of the structural parameters to the sealing performance of the two sealing is obtained by the range method. It is found that the long and short axis of the elliptical groove, the nominal contact bandwidth of the first seal and the section width of the U-shaped beam have significant influence on the sealing performance of the beam seal. © 2021 Journal of Mechanical Engineering.
引用
收藏
页码：147 / 155
页数：8
相关论文
共 17 条
  • [1] FU Changan, SONG Zhiguo, Sealing problem of hydraulic system of ultra-high pressure aircraft, Lubrication Engineering, 4, pp. 5-6, (2000)
  • [2] KANG Zetian, ZHOU Bo, XUE Shifeng, Finite element numerical simulation on thermo-mechanical coupling behavior in shape memory alloy pipe connection, Journal of Mechanical Engineering, 54, 18, pp. 68-75, (2018)
  • [3] WANG Xiaogang, ZHANG Fangxiao, HUANG Peng, Analysis of parameters of pipeline cone sealing structures based on ANSYS, Ordnance Industry Automation, 28, 8, pp. 25-27, (2009)
  • [4] HAN Chong, ZHANG Yong, Research on sealing property of globe-cone joint for pipeline, Lubrication Engineering, 10, pp. 105-112, (2012)
  • [5] ZHAI Fugang, SUN Yugang, DOU Xuan, Et al., Influence of structural parameters on sealing performance of ultra-high pressure pipe joint, Chinese Hydraulics & Pneumatics, 6, pp. 60-64, (2017)
  • [6] OUYANG Xiaoping, FANG Xu, ZHU Ying, Et al., Overview of aviation hydraulic fitting, China Mechanical Engineering, 26, 16, pp. 2262-2271, (2015)
  • [7] AS4207A Fitting End, External thread, beam seal, design standard, (1996)
  • [8] AS4209B Fitting End Assembly, internal thread, retained nut, beam seal, design standard, (1997)
  • [9] JEON J Y, KIM B T., A study on contact characteristics by the geometry variation of beam seal fitting of an aircraft fuel hose, Journal of the Korean Society of Manufacturing Process Engineers, 12, 6, pp. 101-108, (2013)
  • [10] LI Xiaodong, Sealing performance of separable aviation hydraulic fittings, (2018)
12