Experimental study on behavior of reinforced recycled aggregate concrete beams subjected to combined shear and torsion

被引：0
|
作者：
Liu K. [1 ,2 ]
Yan J. [1 ,2 ]
Zou C. [1 ,2 ]
机构：
[1] Key Lab of Structures Dynamic Behavior and Control of China Ministry of Education, Harbin Institute of Technology, Harbin
[2] School of Civil Engineering, Harbin Institute of Technology, Harbin
来源：
Zou, Chaoying (cyzou@hit.edu.cn) | 2016年 / Science Press卷 / 37期
关键词：
Coarse aggregate replacement ratio; Recycled aggregate concrete beam; Shear-torsion behavior; Static test; Torsion-shear ratio;
D O I：
10.14006/j.jzjgxb.2016.S2.002
中图分类号：
学科分类号：
摘要：
In order to study the behavior of reinforced recycled aggregate concrete (RAC) beams subjected to combined shear and torsion, the static loading tests of seven RAC beams with different torsion-shear ratios and recycled coarse aggregate (RCA) replacement ratios were conducted by a self-designed loading device. The test process and failure modes were observed during the experiments. The influences of different design parameters on the performance of RAC beams under combined shear and torsion were elaborated. The results indicate that the RAC beams have a similar failure mode compared with the normal concrete beams, transitioning from the shear type to torsion type with the increase of torsion-shear ratio. As the amount of RCA replacement ratio increases, there is a reduction in the initial torsional stiffness and cracking load, and the brittle failure features become more distinct, while the bearing capacity has no obvious change. The formula in GB 50010-2010 'Code for design of concrete structures' can be used for calculating the bearing capacity for RAC beams under combined shear and torsion. © 2016, Editorial Office of Journal of Building Structures. All right reserved.
引用
收藏
页码：9 / 15
页数：6
相关论文
共 21 条
  • [1] Vazquez E., Overview Regarding Construction And Demolition Waste In Several Countries, pp. 37-173, (2013)
  • [2] Hansen T.C., Recycled aggregates and recycled aggregate concrete second state-of-the-art report developments 1945-1985, Materials and Structures, 19, 3, pp. 201-246, (1986)
  • [3] De Juan M.S., Gutierrez P.A., Study on the influence of attached mortar content on the properties of recycled concrete aggregate, Construction and Building Materials, 23, 2, pp. 872-877, (2009)
  • [4] Martinez-Lage I., Martinez-Abella F., Vazquez-Herrero C., Et al., Properties of plain concrete made with mixed recycled coarse aggregate, Construction and Building Materials, 37, pp. 171-176, (2012)
  • [5] Gu S., Su Y., Hu H., Basic mechanical properties and development research of recycled concrete, Concrete, 4, pp. 90-94, (2015)
  • [6] Ulloa V.A., Garcia-Taengua E., Pelufo M., Et al., New views on effect of recycled aggregates on concrete compressive strength, ACI Materials Journal, 110, 6, pp. 687-696, (2013)
  • [7] Ruan X., Zhao Q., Research on durability and interfacial properties of recycled concrete, Industrial Construction, 42, pp. 577-586, (2012)
  • [8] Bravo M., De Brito J., Pontes J., Et al., Durability performance of concrete with recycled aggregates from construction and demolition waste plants, Construction and Building Materials, 77, pp. 357-369, (2015)
  • [9] Fathifazl G., Razaqpur A.G., Isgor O.B., Et al., Flexural performance of steel-reinforced recycled concrete beams, ACI Structural Journal, 106, 6, pp. 858-867, (2009)
  • [10] Liu C., Bai G., Feng X., Et al., Applicability research on bending limit carring capacity of recycled concrete beams, Industrial Construction, 42, 4, pp. 25-30, (2012)
123