Finite element modelling of transient dynamics of frictional squeal in pin-on-disc system

被引:1
|
作者
Zhang, Lijun [1 ,2 ]
Diao, Kun [1 ,2 ]
Meng, Dejian [1 ,2 ]
Yu, Zhuoping [1 ,2 ]
机构
[1] College of Automotive Studies, Tongji University, Shanghai,201804, China
[2] New Clean Energy Vehicle Engineering Center, Shanghai,201804, China
来源
关键词
Complex modes - Contact state - Frictional squeal - Pin on disc - Transient dynamics;
D O I
10.11908/j.issn.0253-374x.2014.10.020
中图分类号
学科分类号
摘要
A transient dynamic finite element model of disc-pin system was established with finite element analysis(FEA) software ABAQUS. The transient dynamics FEA model successfully predicted the disc and pin motion state, the frictional contact state and feed in energy of the system as well as nonlinear frequency coupling phenomenon of the disc-pin frictional self-excited vibration system. Results showed that, there existed simultaneously warp caused by mechanical action and high frequency normal vibration on disc. Vibration mode of the pin rod was bent-based, supplemented by torsional vibration, and had pure sliding limit cycle. The contact pressure distribution had periodic variation characteristic, and the normal and friction force influenced the frequency. There existed simultaneously feed-in and feed-out energy in the system, and the feed-in energy which was dominant in the system caused friction squeal.
引用
收藏
页码:1586 / 1595
相关论文
共 50 条
  • [1] On the friction-induced squeal of pin-on-disc system
    Lü, Hongming
    Meng, Dejian
    Zhang, Lijun
    Yu, Zhuoping
    Zhendong Ceshi Yu Zhenduan/Journal of Vibration, Measurement and Diagnosis, 2014, 34 (01): : 46 - 51
  • [2] Multi-flexible-body modeling for frictional squeal of a pin-on-disc system based on ADAMS software
    Zhang, L.-J., 1600, Chinese Vibration Engineering Society (32):
  • [3] Time-varying characteristics of frictional squeal in pin-on-disc system: Generation mechanism and key impact factors
    Zhang, Lijun
    Diao, Kun
    Meng, Dejian
    Yu, Zhuoping
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2013, 49 (14): : 99 - 105
  • [4] Squeal occurrence related to the tracking of the bearing surfaces on a pin-on-disc system
    Lai, Van-Vuong
    Paszkiewicz, Igor
    Brunel, Jean-Francois
    Dufrenoy, Philippe
    MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2022, 165
  • [5] Finite element simulation of the wear of polyoxymethylene in pin-on-disc configuration
    Benabdallah, H.
    Olender, D.
    WEAR, 2006, 261 (11-12) : 1213 - 1224
  • [6] Pin-on-Disc Modelling with Mesh Deformation Using Discrete Element Method
    Yan, Yunpeng
    Helmons, Rudy
    Schott, Dingena
    MATERIALS, 2022, 15 (05)
  • [7] Frictional Heat Simulation of Brake Composites in a Pin-on-Disc Tribotesting
    Fakhraddin, Yusubov Fikrat
    NANO HYBRIDS AND COMPOSITES, 2021, 32 : 63 - 71
  • [8] Effect of pin finite width on instability of pin-on-disc systems.
    Tuchinda, A
    Hoffmann, NP
    Ewins, DJ
    PROCEEDINGS OF IMAC-XX: STRUCTURAL DYNAMICS VOLS I AND II, 2002, 4753 : 552 - 557
  • [9] Multiscale thermomechanical modeling of frictional contact problems considering wear - Application to a pin-on-disc system
    Waddad, Y.
    Magnier, V.
    Dufrenoy, P.
    De Saxce, G.
    WEAR, 2019, 426 : 1399 - 1409
  • [10] The influence of pin inclination on frictional behaviour in pin-on-disc sliding and its implications for test reliability
    Yue, Hongzhi
    Schneider, Johannes
    Frohnapfel, Bettina
    Gumbsch, Peter
    TRIBOLOGY INTERNATIONAL, 2024, 200