Electromagnetic wave absorbing properties of asphalt mixture with natural magnetite powder

被引：0
|
作者：
Guan B. [1 ]
Yang T. [1 ]
Xiong R. [1 ]
Wang Y. [1 ]
机构：
[1] Engineering Research Center of Transportation Materials, Ministry of Education, Chang'an University, Xi'an
来源：
| 1600年 / Tongji University卷 / 19期
关键词：
Asphalt mixture; Electromagnetic wave absorbing; Natural magnetite powder; Road engineering;
D O I：
10.3969/j.issn.1007-9629.2016.01.034
中图分类号：
学科分类号：
摘要：
In order to improve electromagnetic wave absorbing properties of asphalt pavement, the asphalt mixture samples were prepared using natural magnetite powder as absorber. The electromagnetic parameters such as complex dielectric constant and complex magnetic permeability of samples with different replacement rates of natural magnetite powder were tested by the method of rectangular waveguide. Reflection loss of samples were calculated based on the transmission line and impedance theory. Results show that with addition of natural magnetite powder, electromagnetic parameters of asphalt mixture are improved significantly. With the increasing grade and increasing replacement rate of natural magnetite powder, the real part of the complex dielectric constant is significantly increased while the imaginary part has little change. Both the real and imaginary parts of complex magnetic permeability are increased with the increasing grade and increasing replacement rate of natural magnetite powder. Asphalt pavement with reflection loss of less than-10dB can be prepared by adding natural magnetite powder in grade of 60 and above. There are three kinds of matching thickness (3, 5, 7 cm) of electromagnetic wave absorbing asphalt pavement during 211 cm. The recommended design value of asphalt pavement thickness is 3 cm. When the designed thickness of pavement layer is higher than 3 cm, the lower replacement rate of natural magnetite powder should be selected. © 2016, Tongji University. All right reserved.
引用
收藏
页码：198 / 203
页数：5
相关论文
共 8 条
  • [1] Wuori A.F., Ice-pavement bond disbanding-surface modifica-tion and disbanding, (1993)
  • [2] Hopstock D.M., Microwave-absorbing road construction and repair material, (2003)
  • [3] Velasquez R., Turos M., Moon K.H., Et al., Using recycled taconite as alternative aggregate in asphalt pavements, Construction and Building Materials, 23, 9, pp. 3070-3078, (2009)
  • [4] Guo D., Research on techniques of snow-melting and deicing pavement basing on microwave and magnet coupling effect, (2011)
  • [5] Guo D., Sha A., Techniques for snow-melting and deiced based on microwave and magnet coupling effect, Journal of Shandong University (Engineering Science), 42, 4, pp. 92-97, (2012)
  • [6] Tang Z., Li Z., Qian J., Application of carbon fiber reinforced conductive concrete for melting ice and snow on road surface, Journal of Building Materials, 7, 2, pp. 215-220, (2004)
  • [7] Ding D., Zhou W., Zhang B., Et al., Complex permittivity and microwave absorbing properties of SiC fiber woven fabrics, Journal of Materials Science, 46, 8, pp. 2709-2714, (2011)
  • [8] Bai X., Hu X., Zhou S., Et al., Controllable synthesis of leaflet-like poly (3, 4-ethylenedioxythiophene) /single-walled carbon nanotube composites with microwave absorbing property, Composites Science and Technology, 110, pp. 166-175, (2015)
1