Measurements of Penetration Characteristics of Jacked Piles in Clayey Soil Based on Fiber Bragg Gratings

被引：0
|
作者：
Wang Y. [1 ,2 ]
Zhang M. [1 ,2 ]
Ma J. [1 ]
Bai X. [1 ,2 ]
Yang S. [1 ]
机构：
[1] School of Civil Engineering, Qingdao University of Technology, Qingdao, 266033, Shandong
[2] Cooperative Innovation Center of Engineering Construction and Safety in Shandong Blue Economic Zone, Qingdao, 266033, Shandong
来源：
Guangxue Xuebao/Acta Optica Sinica | 2020年 / 40卷 / 07期
关键词：
Fiber Bragg grating; Fiber optics; Fiber sensing; Jacked piles; Penetration characteristics;
D O I：
10.3788/AOS202040.0706004
中图分类号：
学科分类号：
摘要：
To extensively study the applicability of Fiber Bragg grating (FBGs) sensing technology in the penetration test of jacked piles, a large-scale model test system is used to conduct the penetration test of jacked piles. This paper uses a fiber grating strain sensor for data testing, while using a spoke type pressure sensor and a fiber grating pressure sensor as control groups. By installing a full-section dynamic spoke pressure sensor and a fiber grating pressure sensor at the end and top of the pile, respectively, the difference between the penetration processes of the jacked piles based on the two sensing technologies is compared and analyzed. Simultaneously, the pile body strain data is collected based on the FBG sensing technology, and the penetration characteristics of the side frictional resistance, the axial force, and the unit side frictional resistance of the pile are studied. Results show that the FBG sensing technology has superior performance in the penetration test of static pressure piles, can accurately reflect the penetration characteristics of jacked piles, and can clearly reflect the pile jacking-in process with the increase of pile driving length. Furthermore, it is found that the driving pressure, the end resistance, the axial force, and the unit side frictional resistance of the pile body have the characteristics of a steady-state penetration. Therefore, this study presents a great reference for the model test and the engineering design of static pressure piles. © 2020, Chinese Lasers Press. All right reserved.
引用
收藏
相关论文
共 24 条
  • [1] Gong X.N., Li X.H., Several mechanical problems in compacting effects of static piling in soft clay ground, Engineering Mechanics, 17, 4, pp. 7-13, (2000)
  • [2] Gavin K.G., Lehane B.M., The shaft capacity of pipe piles in sand, Canadian Geotechnical Journal, 40, 1, pp. 36-45, (2003)
  • [3] Sagaseta C., Whittle A.J., Prediction of ground movements due to pile driving in clay, Journal of Geotechnical and Geoenvironmental Engineering, 127, 1, pp. 55-66, (2001)
  • [4] Randolph M.F., Science andempiricism in pile foundation design, Géotechnique, 53, 10, pp. 847-875, (2003)
  • [5] Li J.P., Li L., Sun D.A., Et al., Theoretical study on sinking resistance of jacked piles in saturated soft clay, Chinese Journal of Geotechnical Engineering, 37, 8, pp. 1454-1461, (2015)
  • [6] Cao Z.H., Kong G.Q., Liu H.L., Et al., Model tests on pipe pile penetration by using transparent soils, Chinese Journal of Geotechnical Engineering, 36, 8, pp. 1564-1568, (2014)
  • [7] Li Y.N., Lehane B.M., Lateral stress for model jacked piles in two-layered Kaolin clay, Journal of Jilin University(Earth Science Edition), 48, 6, pp. 1778-1784, (2018)
  • [8] Zhu Y.Q., Zhu H.H., Sun Y.J., Et al., Model experiment study of pipe pile driving into soil using FBG-BOTDA sensing monitoring technology, Rock and Soil Mechanics, 35, pp. 695-702, (2014)
  • [9] Lehane B.M., Gavin K.G., Baseresistance of jacked pipe piles in sand, Journal of Geotechnical and Geoenvironmental Engineering, 127, 6, pp. 473-480, (2001)
  • [10] Gavin K.G., O'Kelly B.C., Effect of friction fatigue on pile capacity in dense sand, Journal of Geotechnical and Geoenvironmental Engineering, 133, 1, pp. 63-71, (2007)
123