Nanoindentation creep response of Ti–6Al–4V ELI alloy manufactured via laser powder bed fusion

被引：0
|
作者：
Lee, Jeong-Rim [1 ]
Lee, Min-Su [1 ,2 ]
Baek, Ha-Seong [1 ]
Yeon, Si Mo [1 ,3 ]
Kim, Minki [4 ]
Jun, Tea-Sung [1 ,2 ]
机构：
[1] Department of Mechanical Engineering, Incheon National University, Incheon,22012, Korea, Republic of
[2] Research Institute for Engineering and Technology, Incheon National University, Incheon,22012, Korea, Republic of
[3] Advanced Joining and Additive Manufacturing R&D Department, Korea Institute of Industrial Technology, Gyeonggi-do, 15014, Korea, Republic of
[4] Flexible Manufacturing R&D Department, Korean Institute of Industrial Technology, Incheon,21999, Korea, Republic of
来源：
Journal of Materials Research and Technology | 2024年 / 33卷
基金：
新加坡国家研究基金会;
关键词：
Anisotropic creep - Compressive residual stress - Creep behaviors - Creep displacement - Creep response - Laser powders - Nano indentation - Nanoindentation creeps - Powder bed - Ti-6al-4v;
D O I：
10.1016/j.jmrt.2024.10.006
中图分类号：
学科分类号：
摘要：
59
引用
收藏
页码：2803 / 2811
相关论文
共 50 条
  • [1] Effect of Laser Shock Peening on Properties of Heat-Treated Ti–6Al–4V Manufactured by Laser Powder Bed Fusion
    Inkyu Yeo
    Seongguk Bae
    Auezhan Amanov
    Sungho Jeong
    [J]. International Journal of Precision Engineering and Manufacturing-Green Technology, 2021, 8 : 1137 - 1150
  • [2] Influence of laser post-processing on pore evolution of Ti–6Al–4V alloy by laser powder bed fusion
    Shen, Bingnan
    Li, Hui
    Liu, Sheng
    Zou, Jing
    Shen, Shengnan
    Wang, Yinghe
    Zhang, Tao
    Zhang, Dongqi
    Chen, Yinghua
    Qi, Haiqin
    [J]. Journal of Alloys and Compounds, 2022, 818
  • [3] Surface Characteristics of Ti–6Al–4V Alloy Based on the Process Parameter and Abrasive Process in the Laser Powder Bed Fusion
    Won Yeong Kim
    Eun Yoo Yoon
    Ji Hoon Kim
    Sangwoo Kim
    [J]. Metals and Materials International, 2023, 29 : 2345 - 2357
  • [4] Laser additive manufactured Ti–6Al–4V alloy: tribology and corrosion studies
    P. Chandramohan
    Shepherd Bhero
    Babatunde Abiodun Obadele
    Peter Apata Olubambi
    [J]. The International Journal of Advanced Manufacturing Technology, 2017, 92 : 3051 - 3061
  • [5] Laser Additive Manufactured Ti–6Al–4V Alloy: Heat Treatment Studies
    P. Chandramohan
    Shepherd Bhero
    Farouk Varachia
    Babatunde Abiodun Obadele
    Peter Apata Olubambi
    [J]. Transactions of the Indian Institute of Metals, 2018, 71 : 579 - 587
  • [6] Electrochemical Polishing of Additively Manufactured Ti–6Al–4V Alloy
    Yifei Zhang
    Jianzhong Li
    Shuanghang Che
    Yanwen Tian
    [J]. Metals and Materials International, 2020, 26 : 783 - 792
  • [7] Additively manufactured Ti–6Al–4V thin struts via laser powder bed fusion: Effect of building orientation on geometrical accuracy and mechanical properties
    Murchio, S.
    Dallago, M.
    Zanini, F.
    Carmignato, S.
    Zappini, G.
    Berto, F.
    Maniglio, D.
    Benedetti, M.
    [J]. Journal of the Mechanical Behavior of Biomedical Materials, 2021, 119
  • [8] Deformation and control method of thin-walled part during laser powder bed fusion of Ti–6Al–4V alloy
    Chen, Changpeng
    Xiao, Zhongxu
    Zhu, Haihong
    Zeng, Xiaoyan
    [J]. International Journal of Advanced Manufacturing Technology, 2020, 110 (11-12): : 3467 - 3478
  • [9] Deformation and control method of thin-walled part during laser powder bed fusion of Ti–6Al–4V alloy
    Changpeng Chen
    Zhongxu Xiao
    Haihong Zhu
    Xiaoyan Zeng
    [J]. The International Journal of Advanced Manufacturing Technology, 2020, 110 : 3467 - 3478
  • [10] Simulation-assisted analysis of microstructural evolution of Ti–6Al–4V during laser powder bed fusion
    Peter Holfelder
    Armin Witte
    [J]. Progress in Additive Manufacturing, 2020, 5 : 237 - 246
12345